Recent content by baldygit

OK. Thanks for that. I suppose if I didn't use it every day for work and it was a project,I'd have a go! Oh well!!

My series 3 is needing a clutch and rear seal replacement. I've tried loads of 4x4 local repairers but no one seems interested. I do everything myself normally but I think will struggle on my own in the driveway. The cross member is removable which makes it a bit easier. Does anyone have any...

Thanks for the replies . Haven't been able to access 'Landyzone' website for a while, My computer said that the site has been hacked !!

Hi. For the last 12 months I've had this problem of the battery draining over a couple of days. I replaced the battery earlier this year and replaced the alternator a month ago, But still the same! Difficult to test each circuit as they're are only 3 fuses. Does anyone know if a stater solenoid...

Well, I just checked and the casing is all definitely live when connected. Also the resistance on my multimeter (set at 20k) reads 0 between the input terminal and case. Then 4.70 between outlet terminal and case! The crazy thing is, the replacement that Paddocks sent is the same??

Thanks for that. I had a good look on Sunday. Had the dash out and cleaned up the fuse box etc. Nothing was obviously wrong. Couldn't see any dodgy wires or loose anything. When testing the new voltage regulator I discovered the casing is live when 12v is attached! Is that right? 'Cos surely...

That's a great idea! Will do that. certainly make access easier

Many thanks for that. I will give it a try. It's a bit of a nightmare behind the dash. Not a lot of room!

Hi. I have a problem that the gauges show overheating and the fuel is high. So I changed the voltage regulator. Trouble is the new one blows the fuse on the wiper/indicators/guage circuit! So I tried another and the same. Any Ideas?

Hi. I have the above which is used every day for gardening work. So when something's wrong, it's a worry. Had a new galvanised chassis fitted last year.

Hi. Does anyone have an idea of where to get and what roof bars can be fitted to a series 3? I don't want the roof 'cage' but something I can fix ladder etc to. Thanks