Recent content by Aussielandylover
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
A
To be fair am not really wanting a lift at this point, just figured if I’m replacing front springs may as well put in a better than OE option if their is one. But thanks for the heads up about adjusting the rear settings with nanocom.
-
A
Yeah have thought about that. Which is why I'm gonna fit front springs first and check all the heights and angles of 'ride height sensors' at rear afterwards. I know if I fit rear spacers 100% gonna have to adjust or fabricate new bracket for rear sensors. Fingers crossed the new front springs...
-
A
Gonna keep the air as the bags and lines were all renewed before I bought it a year ago. Need to measure the angle of the ride height sensor brackets before and after as well I guess. Was hoping because I'm only changing the fronts springs, and not by much hopefully, might get away with not...
-
A
Yeah your right, bit more research on tinterweb tells me the new spring rate would be 180lbs/in compared with OE of 150. OME website says expected lift of 40mm ish. In my experience I think the old girl probably survive that. As you said, just have to keep an eye on CV’s and UJ’s. At least...
-
A
Thanks mate, thought that might be the case. Specs do say OME springs ‘free length’ only longer by 10-15 mm so just thought I’d put the question out there to the locals. Cheers mate!
-
A
Ahaa, just found it.
Caution: Due to altered gearbox mounts on models after 1998 any lift above
OE ride height may cause front driveline vibration that can only be rectified
by fitment of a front double cardan propshaft.
-
A
Has anyone fitted OME front coils to a facelift Disco II with ACE.
Their website says something about the lifted springs affecting the front driveline. (may create noise or something) Can't now find disclamer otherwise would have cut and paste.