Recent content by ASBO

Already been round the car with a magnifing glass. Ronnies stuff at YRM is excellent, I only live about 3 miles from his place and use his stuff all the time, infact just fitted one of his outer sills to a freinds disco at the weekend. Still counting my blessings and will be going to monthly...

Driving this morning and the my disco lunged to one side and mounted the curb, total lack of control all I could do was slam the ancors on. Luckely no one around but stopped short of a telegraph pole by about a nats wisker. On inspecting the under side of the car rear prop was hanging...

Its one of those where only you can decide really, I had a 300 for about 5 years but went through 3 different engines and 3 heads in that time with her. I was unlucky only got a year or so out of each before they went on me. However an engine rebuild is not as easy as it sounds if you have...

Sound a lump easier than what i had to do, took me approx 2 days on my own chopping the old one out and assembling and welding a new one from YRM. If i ever have to do another i'll try your way, thanks for that Andy T AKA ASBO:)

I like the sound of that but how you fitting body mounts?

Its no an easy job, had 6 days of welding and plating to do on a friends Disco for test last summer. Cutting the old one out isn't so bad but you need to remove the bumper and support the weight of body by propping wood between the top of the door and the chassis, also need to place a piece of...

Thanks Rob, it was taken at Parkwood last summer at the Discovery owners club National meet.

Just want to say Hi to everyone, I have just joined. My names Andy (ASBO to my friends, goes back to my first Disco tell you later) I have a D2 and Disco 200Tdi at the moment and I'm based in the North East. D2 for the Road and the 200 for Offroading. Member of the Discovery Owners Club and if...