Recent content by Arnodafe72

Hi Andy ! Have no parking lights front & back, and no rear registration plate lights working. All fuses are good and the bulbs are good .....any ideas ? No power getting to them..... Freelander 1 petrol. regards Arnodafe72

Hi Nodge ! Have no parking loghts front & back, and no rear registration plate lights working. All fuses are good and the bulbs are good .....any ideas ? No power getting to them..... regards Arnodafe72

Hi again man - yeah, new light issue after putting new registration plate lights on the trailer and hooking it up to the freelander 1, 1.8L facelift petrol, the position lights (also known as side lights/parking lights) won't work - or the registration plate lights on the car - have continuity...

Hi guys ! Yeah, changed the registration lights on my trailer and now none of the position (also called parking/sidelights) are working on my freelander 1 1.8L petrol k-series. The bulbs are whole and the fuses are fine .......even with a new bulb in the front position light , it still doesn't...

Ok, cheers ! 🍷😏

Thanks alot ! Appreciate it - gonna try to find some pics of the bolts so i remove the right stuff ! Thanks again, arnodafe_72 (do you think maybe the difference in the hole position was due to it being either petrol or diesil ?)

You mean 100 quid ? Also, what specifically is the subframe part ? Sorry - just want to be sure. Also, you mean replacing the entire ceadle so that some plates may no fit properly - as opposed to just replacing the bands.Thanks again ! 🍷😏

Hi guys ! Have a 2005 Freelander 1.8l petrol facelift 1795cc 86kw/117hp 18K4F. The bands on my petrol tank support are rotting due to rust and need to change them. Question is, searching for parts - does the petrol cradle or bands of the Freelander 1 diesil fit the petrol model - are they the...

Oops ! Hi again Nodge ! Ha ha ! Fuel filter sensor fitted in the new pump so the fuel meter in the dash reads right, but now the car is hard to re-fuel at the petrol station.Got the click problem ! So, i remember when cyphoning out the petrol from the tank to filter the fuel and refill the tank...

Hi again Nodge ! Ha ha ! Fuel filter sensor fitted in the new pump so the fuel meter in the dash reads right, but now the car is hard to re-fuel at the petrol station.Got the click problem ! So, i remember when cyphoning out the petrol from the tank to filter the fuel and refill the tank, that...

Cut the wires on the new sensor and while stripping it bare for connection, the end came out where it connects to the plug connector pin at the top of the pump. I was told not to attempt to remove them as they are soecially keyed to not be removeable - however, all of them released easy, so i...

Sounds right - just switching the wires won't work as its the resistance mechanism in rhe circuit board. Funny they didn't pick it out - even from Rimmer Bros in UK who looked it up with my VIN number and all the details - same pump code , no distinctions or special points ...... connecting new...

Did you cut any wires ? Or change the whole segment with wires connected to the top white part ? Then you would have to disconnect the inner fuel line and re-attach ? The two blue wires going to the float circuit board are soldered - how did you avoid wiring re-do ? Thanks !

You're right - thought the petrol gauge didn't read enough then filled the tank - meter shows empty - f@ck ! Which prts dis you change ? The float , the part its connected to and the two wires which go to the top ? The two blue wires or ? Do you have a pic ?

Yeah, have the correct matching part number as i realised myself that the one i ordered from UK was wrong - wanted the Bearmach but they don't do the one i need, so i got one in the end from Germany which arrived quickly since time was lost to cancelling the first one i ordered. Am keeping the...