Recent content by Armandbey

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    New Member

    Thanks Brian
  2. A

    Disco 1 compression issue

    I see that the previous owner drilled a hole in the oil filler cap.So this might have been a issue before.Did not have any problems before and I've had the car for about 10 years now.
  3. A

    Disco 1 compression issue

    I've got another donor Disco.Maybe I should start with changing all the sensors first.
  4. A

    Disco 1 compression issue

    Thanks Discool With redone I mean the engine was completely redone.Rings,bearings.heads sent for engineering,so everything was redone.What I can't figure out is that if it was rings,shouldn't the car smoke a lot and use oil.It is not doing either of those.Looks like I will just have to start...
  5. A

    Disco 1 compression issue

    Thanks.I will do this and see if I can see where the issue is.Thanks for the help.
  6. A

    Disco 1 compression issue

    Hi Stanley Thanks for the response.That is why I can't figure it out.There is no oil in the water.The car is not smoking or using any oil.It is just down on power and breathing heavily through the oil filler hole.Do you think a dead plug could cause this as it is definitely not running on all...
  7. A

    Disco 1 compression issue

    Hi.I need some help please.I have a Disco 1 V8 3.9L.My problem is that it is blowing a lot of air out of the oil filler cap.The engine is also running very uneven and it does not have any power.It starts and idle fine.Someone told me that it could be sump compression but the motor was redone...
  8. A

    New Member

    Hi My name is Armand.I am from South Africa and I've been driving a Discovery 1 V8 3.9L for the past 10 years.
Back
Top