Recent content by angliaalan
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
A
i put a live wire on terminal 5 in relay 7 n/s fan works speed adjusts up and down
what do i have to do now? is the control panel needing replaced ?
-
A
still no joy :(
swapped relays checked fuses plugged in other blower motor nothing happening
tried to find a positive in the plug that plugs into motor but could only find a negative
any other suggestions on what to try :confused:
-
A
both fans are not working how do i check the relay is working? the relay has the numbers 1/2/3 and 5 next to the terminals
-
A
1995 p38 2.5 heater fans not working fuses seem to be ok what and how is the next thing to check
-
A
can anyone tell me how to check if my heater fan switch is faulty as i don't seem to power at the fan
thanks
-
A
i am looking for the part of the seatbelt that bolts to the drivers seat
-
A
i have a P38 td as it has the bmw engine in it will the flywheel from a bmw 525 td fit the range rover as the bmw one is half the price.
-
A
hi i am looking for the seatbelt clip part the short part on the inside of the drivers seat if you have it
Alan
-
A
thanks for your help
will i get the spiral pins from my local land rover garage
-
A
i have just taken the gearbox out my P38 wich has a problem with the clucth and discovered the roll pins in the clutch release fork are broken
is this a common fault and how hard is it to replce them
-
A
Anyone know how to wire up self levelling xenon headlight from a L322 ON A p38
-
A
yea thats what i am doing
is there anyone doing a wiring loom for this upgrade
-
A
doing headlight upgrade so so need new plugs to fit new headlights
-
A
where can i get the plugs to go on the back of the headlights
thanks
-
A
my friend has a 99 TD5 with the clutch slipping it had a new clutch just over a year ago his disco has a stage 2 upgrade. has anyone else had this problem? what clutch would you recommend?
he has been advised to change the flywheel what do you think?
is this a job that can be done by two men in...