Recent content by andye611

I hope not, they're brand new;-)!

Thanks, I will also get the rears balanced on the weekend. The vibration is through the steering wheel between about 50 & 60 MPH. The centre bore of the wheels is slightly bigger than my hub, so the bolts take the load, but I believe this is normal on modulars? Thanks again, Andy

Have you checked for oil in the ECU red plug?

Hi all, I have jut fitted a set of 265/70/16 general grabber at2 on steel modulars to my 2001 discovery TD5 and find a bad vibration at 80-95 KPH, I have taken the care to a tire shop today who have re-balanced the front wheels, but this has not solved the vibrations. Wheel nuts are...

I feared as much! Must say though, I find it odd that it measures 0degrees with a spirit level! I'll book it into LR! Cheers

Right, it's working! Replaced both air springs & sensors today. Initially it did not work, so I directly powered the solenoids as advised before in this thread and inflated just until there was some pressure in the air bags. Then it decided to work, so I got the wheels on and took it out for a...

Ok great, that makes perfect sense as I removed sensors and found they were so corroded the threads had turned to dust & I couldn't bolt them back in! Cheers again

Thanks Sierrafery, I should read more carefully! The bags let down slowly (both sides), assume they are fecked..... Got a new set anyway:-). Ok, the sensors do seem well and truly ruined so I'll order 2 new ones tonight and a Nanocom (the amount of times this would have been useful now!!) I...

Hi! Right, I connected up as per your suggestion & the air bags inflated:-) Took it for a short drive & it's on its arse again, so I guess the short drive when it was on the bump stops has ruined the airbags (I suspect they were 15 years old!), new airbags in the shed, so will get them on...

Yes, what you are saying makes perfect sense, I cannot explain very clearly my question though! I will supply a direct live to the points you you have pointed out on your diagram, each solenoid has a 2 pin connector (live & earth), so I was wondering if I will have to make some kind of earth...

Thanks for your reply, you have certainly shredded some light for me! I guess by bridging the relay and overriding the slabs ECU, I am powering the compressor but not opening the valves to let air into the bag? Although the bags do inflate to 'shape', is that possible with the ECU over...

Hi all, let weekend I was up in the mountains with my 2001 td5, noticed a bumpy ride, so pulled over and noticed the rear suspension was on the bump stops (both sides). Checked fusible link & relay, both fine. Called my recovery service who came, tested the compressor and told me it's...