Anaconda's latest activity

I have found that, in general, Corteco seals are pretty good and a reasonable price. I almost always buy two seals for any seal I may be changing, bound to need it in the future sometime.

The one I got looked pretty good quality, thankfully not britpart or the like. If it started leaking from the old one and now this new one then I'm inclined to believe there's something else going on but I'll double check the banjo bolt. I use a...

Funny how "I might as well do this at the same time" leads to multi-day work projects. After finishing the installation of the Roamer OD, I thought I'd add some heat/sound insulation to the bottom of the centre seat panel, which lead to doing the...

Maybe bad luck with regards to the seal. I fitted a Genuine flange and seal a couple of years ago, leaking again. Also had a seal fail in no time and others just fine. Good job the seals are cheap enough, try another one. What do you use to knock...

Sounds like a right drama driving over there, not really something we have to consider here. Do you also need fuel additives during the cold weather?

Knackered flange, damaged the new seal?

It was 6k all in.

Sure thing, here a few from his social media, im pretty sure he will do whatever spec you like, high end like these, or a simple chassis swap replacing just the parts that need doing.

Thanks, will give that a try when I get a chance.

Thanks, some photos would be nice if you don't mind. I should mention I am in the preliminary planing stages at the moment. With prices of vehicles going down it might never be worth doing.

Thanks but a little bit to further than what I might consider to be 'within reason'.

Looks very good.

https://www.ebay.co.uk/itm/135678141221?_skw=135678141221&itmmeta=01JSP3R4JEFZZQZYKXGWX47M7P&hash=item1f970c2325:g:gdcAAOSwXR5nyURr&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1eFdK8%2FSoARJT6HzpgYhgumUmAYlYbUGVaLmu%2F4hapNbp%2FYKLE74nFhHwMHUyraFcrL...