Recent content by amun1000
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
A
Is there any way we can get back up of the forum via the hosting control panel - or the web forum admin page. I will register a new domain and host it - all we need are the files. @Big Sandy does the admin page allow to make a backup of the forum?
Andrew
-
A
Hi Thanks for the replies.
@Bobsticle: The other end of the spring is attached to the chassis but it is just hanging - no pressure/weight being applied to the spring. When I do offer the spring to the axle the chassis just starts lifting and I can never get the spring to the bottom of the...
-
A
Still not adding up. I have attached an image with both the ends connected to the chassis. It still seem short. When I offer up the spring to the axle using the jack the spring is forced inside the hanger so can never push out and flatten. Never had this problem with the fronts.
Any...
-
A
ok thanks - I'll try that
-
A
Hi
Fitting new leaf springs as my old RM springs are sagging. Got some new ones from ebay however when fitting they are coming up short in length. They measure 64cm either side and are being fitted to a Series III landy. The pin is centered but still they seem woefully short - see attached...
-
A
Sorry to hear about this. I am willing to host for nothing if the back up of land rovernet can be found and just host as a reference forinformation. To much information to be lost there
-
A
Do you still have the rad front panel - if so any piccies
Cheers