Alibro's latest activity

I set the timer to charge on cheaper overnight leccy and when I checked this morning it had worked without burning down the house so a result! 😊 Now I know it works I need to think about reducing the number of Arduino's and tidying things up but...

Well done for getting it sorted. As a matter of interest, can you buy the sockets those chargers plug in to? Might stick 1 on the side of my Freelanders so I can plug a charger in and make it look like its charging. Quite often the charging...

Well done - that’s quite some feat

Thanks mate, I spent weeks procrastinating over this but in the end it was fairly simple to do. DeepSeek did all the heavy lifting for the programming and the Voltage Divider Circuit that senses if the cable was plugged in was also simple in the...

It works 😊 I called into a Tesco in Lisburn Co Antrim today, plugged it in, pressed the charge start button and it started charging straight away👏

So after a couple of weeks procrastinating I finally made time to try and figure out how to make the charger work at a commercial EVSE which the setup above failed to achieve. It works great at home but commercial chargers require a low...

To solve this and any further high pressure fuelling problems that come my way, I have purchased a 6,000 PSI gauge and an adaptor that will fit into the hp pressure sensor hole. This will allow rail monitoring. If low I can also fit the gauge to...

Have you metered out the injector loom? Might be as simple as a broken wire.

OK it's official. Don't think vehicle has had an inlet clean, egr clean, oil change or filter change or air filter since it left LR all shiny new !! Have a look at these. The oil filter just fell apart. Wonder why it was overfuelling a bit...