Recent content by adrian owen

i would just like to say to members what my problem was on my td5 when the engine light would come on , could start fine but the minute i pulled off light was on after many things changed and messed with , it was a broken wire on the crank sensor , so hard on this site to get past endless adds...

the gearbox is out of a v8 no crank sensor on it used a old milner conversion kit to mate them . I unplugged the ecu I think this is the main problem , im going to lend a snap on diagnostics box , garmin I think of a mate to see can I use this to turn off things I don't want

2020 already , thanks new to this site will get pics and try to upload not to good on tinternet things , used to do it to v8 rangys years ago . tried the electrics today only got indicators flashing non stop and m and c I think on dash flashing think this is to do with box swap . need a link...

hi folks I have just fitted a perkins phaser into a disco 2 it was auto with a blown engine . the engine was mated to a v8 manual box its all in from a mechanical point of view , my question is the wiring and alarm . do I leave the ecu in and use the old loom from the old engine to let the car...

hi my td5 r9 relay clicks like a machine gun with the keys in my pocket , WHY . it wont start. if I mess with the relay I can get it to run for a few minutes then the engine management and glow plug light flash the engine miss fires in time to the relay over fuels as black smoke comes from the...