Recent content by 200 tdi

Hi Guys and girls, could use some help here. I need to replace the metal fuel filler and the filler neck to tank hose on a D reg 90. My parts guy said the parts are obsolete now or very expensive if I manage to find online. Parts guy reckons Swapping for later parts NTC2676 filler neck and NTC...

Thanks everyone. I just did the injector flange nut up to 55 nm using a plate I made to hold the flange, and hoped it hadn’t moved. Put it all back together and she seems to go fine.

Thanks Adrian. I’m hoping it the shaft hasn’t moved independently of the coupling and is locked on the taper. Do you know the torque for the large m14 bolt that holds coupling on, I’m struggling to find anything on it. So you are saying just nip the afore mentioned bolt, then hold the flange...

Thanks for the link turrican, some handy info on there. You wouldn't happen to have any photos of the before shots you took, so I could compare and see what it is supposed to look like. Are there markings on the shaft or did you mark it, I cant see any marks on mine. If I think its ok and its...

Hi, So I was changing the cambelt and on a discovery 200 tdi engine (in a defender), and have undone the central nut on the injector pulley (nut fits a 22mm socket), with the spring washer behind it!! I gather I shouldn't have done this without locking the pump, and in any case is not necessary...

Hi, The clutch on my D reg 90 200 tdi is on way out. Have read a lot about HD clutches on the forum, with the top ones seeming to be a 130 plate with modified fork and upgraded release bearing. So will a 130 clutch fit in my 200 tdi? If so is it ok to fit because as it is slightly larger it...

Hi, Just introducing myself, just joined. I have a D reg 90 and have put a 200 tdi on it. It’s a farm truck mainly used for towing!! Cheers