Recent content by 1problemafteranother
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
1
There's no chance of removing the spring selector mechanism in the car as the engine mount bracket is in the way, found out the hard way!
A parallel punch would work great, however there's no-way that would fit with it in-situ, there's like 3inch [75mm] or so each side just wouldn't fit.
If...
-
1
I've heard there's problems getting these out. There's a few threads on here that mention the removal of this but not one has any reply's.
You wouldn't happen to know the name of the tool to insert and remove the roll pin would you?
Thanks...
-
1
Thanks nodge68,
Can you remove the spring selector mechanism [STC4632] from the gear box, I think there's like 5 screws [STC4631] that hold it on. Is it just a case of undoing them and removing it or will this mess anything up in the gear box? Having it out of the car will make it easier to...
-
1
Hi, I'm currently trying to remove some of the play out of the gear stick. The car has become a nightmare to drive. Changing up is tolerable but going down through the gears is a nightmare. The shifter has play in all directions. I've currently replaced the rear bush linkage and the "floppy...
-
1
Hi, I'm currently trying to remove some of the play out of the gear stick. The car has become a nightmare to drive. Changing up is tolerable but going down through the gears is a nightmare. The shifter has play in all directions. I've currently replaced the rear bush linkage and the "floppy...