tdfive

New Member

• Sep 26, 2012

• #1

Anybody fitted bog standard 18's from a L322 to the Disco 2 without this "wheelnut and spigot kit" that costs more than the damn wheels and tyres?

Seems a bit of a con, especially as i cant afford it.

Have searched but havent found sod all relating to fitting them without the spigot kit except the odd "You'll crash and die" post.

 

alex8882

Well-Known Member

• Sep 26, 2012

• #2

thought the d2-l322 and p38 wheels fitted straight on. I know you need adapters to fit d2 wheels onto a d1.

 

Chrisfrain2007

Active Member

• Sep 26, 2012

• #3

Im pretty sure the wheel nuts on a d2/ p38 are wrong, so won't hold the wheel on properly/ safely, the spigots sit on the hub centres to support the vehicle on the wheels, I would not use them without the kit, regardless of price

 

steve's P38 RR

Active Member

• Sep 26, 2012

• #4

no matter about cost, you living or killing any one else, you wont fit them on you car without the wheel nuts, let alone drive it any where, so I wouldn't worry about dieing.

the wheels nuts on both wheels sit though the nut so far, You'll know what i mean if you've taken one nut off well the hole in a l322 or sport wheel are smaller so your nuts wont even reach the threads.

 

tdfive

New Member

• Sep 26, 2012

• #5

Never touched an L322 tbh, I suppose thats cleared that up then, Cheers lads.

 

alex8882

Well-Known Member

• Sep 27, 2012

• #6

so what your saying is that you will need smaller wheel nuts. wish a d1 was that easy pcd is completely different to the td5 d2