border
Well-Known Member
Series 2 rebuild which has a 200 tdi engine, Just about ready to fit new clutch , Please forgive me but I know there will be an Obvious answer to this but I do not know.
The old clutch I took out in first pic did not look to bad but has been stood in there for 10 to 12 years or more so going to order new. Anyway when I separated engine from box was expecting to see the ordinary gearbox as was on the last Series 3 rebuild I done with clutch fork etc, But it seems I have a series 2 gearbox with the slave cylinder on the side. No clutch Fork, Now the question is why did someone put the Series 3 Pressure plate in there ? the Clutch plate is 9.5 inches So which clutch kit do I order ?
The old clutch I took out in first pic did not look to bad but has been stood in there for 10 to 12 years or more so going to order new. Anyway when I separated engine from box was expecting to see the ordinary gearbox as was on the last Series 3 rebuild I done with clutch fork etc, But it seems I have a series 2 gearbox with the slave cylinder on the side. No clutch Fork, Now the question is why did someone put the Series 3 Pressure plate in there ? the Clutch plate is 9.5 inches So which clutch kit do I order ?
