Towsey post another picy when you resolder them just to make sure neither of us need to go to spec savers !! LOL
be it i'm due an eye test ! hahaha

Steve
 
Behave man your making me hungry!

Ok il take your word for it and il open the other one up when I change them. yeah I will do when I get it done

Cheers

Towsey
 
Just weight while your central locking stops working :eek: got some cheep fixes for that as well !!


RAID THE FRIDGE

Steve
 
The joint below the hole in the board is the one which went on mine and I think is the common one to go, the other two which have been mentioned do indeed look like needing the same treatment. I wouldn't be surprised if all three joints are for the same relay.

Hopefully that'll sort the problem out.
 
Hi nat
Hopefully he's got it sorted?? I only told him to raid the fridge ! NOT to shut the door behind him self !! :eek: LOL

Steve
 
Haha funny man, I'm still here

Nat, your absolutely right, all 3 joints are for the same relay! Il be doing it soon cos I'm curious to see if it cures it

Towsey
 
Don't forget Towsey there's a bacon butty on this ! LOL
sorry about talkin about food, may I suggest that you only get half way in the fridge next time you raid it !! LOL

Steve
 
Ey don't worry, why do you think I'm taking my time...I like my bacon slowly and well grilled please

Just done my rear prop conversion to get rid of the donut today, ooo I like donuts aswell by the way, even tho I'm getting abused on here for wanting to take it off. Then I need to fit my egt gauge and then il re solder that module and put it back in

Towsey
 
Right then here we go...

Soldered the dry joints in my original module today and re fitted it and so far so good, but it was an intermittent fault so time will tell.

Here's the pic I was asked for of it done
 

Attachments

  • image.jpeg
    image.jpeg
    354.7 KB · Views: 127
Got rid of donut on mine 2 years ago ! not nice going down motorway at 45 mph , any faster & the truck was shaking it's t*ts off :eek:
+ the damage if it had let go:eek::eek::eek::mad::mad::mad::mad::mad::(:(:(:(:(
 
And here's a pic of the other one that's been in with a similar looking problem

Towsey
 

Attachments

  • image.jpeg
    image.jpeg
    333.1 KB · Views: 155
Haha. Ey i didn't doubt you but il get the grill on anyway

Can you see the pics ok, I don't know how to put them up big and in the middle of posts like most other people do

Towsey
 
Can see me getting FAT at your expense LOL
yes can see picys OK no probs when you up load them on here there's a box you tick to make it come up large straight away , I will up load a picky just 2 check I've got it right !!!!

Steve
 
This is part of a tool that I made to change the valve stem oil seals , so's not having to take the head off ! 300tdi

Steve














DSCF5003.JPG
 
Yeah they have come up rite, so how do ya do it?

That's a rum lookin thing but there useful tho aren't they

Towsey
 
sorry to jump in here but no point making another post for the same issue, i have a 300tdi and the rear windows dont work at all, i've tried to resolder the lift unit but still no joy. any ideas where or what to look at next before i start taking the motors and everything else out!
 
You must log in or register to reply here.

Similar threads

L
P38A Faulty window switch panel
Replies
4
Views
281
LR-hobbs
L
M
Tail door window not working
Replies
10
Views
711
MarcDelonghi91
M
B
[P38] Exhaust gases in coolant
16 17 18
Replies
349
Views
15K
Dippypud
Dippypud
A
Interior Lights & Electric Window Switch Failure??
Replies
3
Views
460
Arctic2
Arctic2
J
Help.. stuck in superlock alarm
Replies
2
Views
586
Landmark2
Landmark2