M

Malamuteracer

Member

• Yesterday at 15:41

• #1

Hi everyone,

I have just swapped my old engine out with my gearbox and replaced it with a new one. Trying to start her back up and all she is doing is making a clicking noise coming from the engine. Not even trying to start. Do I need to reset the engine with a diagnostic tool? If so, what would be a good suggestion to buy? Price is not an issue.

Thanks Stuart

 

M

Malamuteracer

Member

• Yesterday at 15:42

• #2

Sorry,

It's for a land rover discovery 3 2.7 v6 2005

 

S

Shedload

Well-Known Member

• Today at 09:39

• #3

I would imagine the ECM would need coding to the engine, but start with the basics.
There is a click ? Is it quiet like a relay if so check engine bay fusebox for correct position and fitment.
If it loud like a starter, make sure battery is fully charged and all connections to starter and earths are secure.

 

M

Malamuteracer

Member

• Today at 15:19

• #4

Hi,

Clicking noise is away, when you try to start the engine, the Clicking noise is coming from the starter motor

 

S

Shedload

Well-Known Member

• Today at 15:30

• #5

No harm in running a diagnostic, personally I would go for Autell or Foxwell as they have wider vehicle coverage.
If it just for LandRover I believe Lynx is a good one. Whatever you choose just ensure it covers your model and has plenty of life left. Some only cover vehicles to a set date.
But start with those connections and the starter relay.

 

M

Malamuteracer

Member

• Today at 15:34

• #6

Hi,

Thanks for the information. Thanks for your help. I am sure it's not going to be something that complicated. My mate has a diagnostic tool which I am getting tonight or tomorrow so I'll see what happens.

Thanks amigo