[Datatek]

Hi Datatek,

I just sent you back an email where I have drawn onto the image you Sent over. I also placed a protractor over the top of your image and the angle I have drawn.

Assuming I dont have the wider bottom slots that will regulate the beam position do you think the angle I have drawn will get me somewhere close if i dont have that reference of the wider slots.

Many thanks

Yes.

 

[korthaldisco2]

So im back to square one. Datateks solution doesnt apply to a 2004 Disco headlamps.

 

[korthaldisco2]

And given JLR dont make the phase 2 lights anymore they are hard to find.

I need to remove the phase 2 headlamp unit and replace them with a more readily availible model and that is cheaper.

Any ideas !?

 

[Stanleysteamer]

And given JLR dont make the phase 2 lights anymore they are hard to find.

I need to remove the phase 2 headlamp unit and replace them with a more readily availible model and that is cheaper.

Any ideas !?

Have you heard back from Rob?

I don't know if phase 1 ones will fit, you'll have to ask, but I do know that others have done the opposite, i.e changed phase 1s for phase 2s and they had to cut stuff about, so fitting phase 1s might be easier. You might need to get them off Rob and a few other bits so that they fit properly. (Talking front body panels here.)

Round here there are a heck of a lot more Disco 1s around, and the headlight off them is the same as the early Disco 2s as I had to pinch one off one of my Disco1s to get it through the MOT. (I may have saaid this before.)

 

[Stanleysteamer]

I did this and had a bit of a look.
There is one Disco 1 being broken and links to other secondhand parts dealers.

https://www.leboncoin.fr/recherche?text=phare+pour+Discovery+1&kst=k

Best of luck.