[Salisburylander]

It has stopped working! I’ve checked the fuse and it’s alright; is there anything else I can do to check its operation?

I think I’ll end up taking the bumper off to check it.

 

[discool]

Well what ever, u will have to check the 12v supply is reaching the motor, and it so, then it could be as simple as the pump impeller is stuck, and after removing the pump a quick flush through will remove the debris that's stopping it from spinning.

 

[sierrafery]

It has stopped working! I’ve checked the fuse and it’s alright; is there anything else I can do to check its operation?

I think I’ll end up taking the bumper off to check it.

You dont have to take the bumper off only that front wheelarch splash shield cos the pump is behind that the first from your side

 

[Salisburylander]

Thanks for that; makes it so much easier. I’ll have to get me Haynes back off my colleague.

 

[meego]

Thanks for that; makes it so much easier. I’ll have to get me Haynes back off my colleague.

You might have a bit of difficulty with the screws being rusted up on the splash guard. I had to grind the head off a few of mine. Replaced them with stainless.