Latest activity

I have, don't have the eka code either.

Really sorry to be asking for an answer to something I think I know the answer to but I’ve ordered so many wrong parts lately I wanted to check before dropping £150. I want to buy Puma locks for my 10P TD5 so I can get everything on the same...

There is a specific way to check the fluid level, basically it needs to be running when you do it.

Also what fluid was in it and what did you put in it?

If coming out breather I’d have said overfilled on oil.. how did you check if trans fluid is low?

Greetings hudo, hope it’s serving you well!

Welcome, it’s a great forum and you certainly sound like you’ll be busy!

Welcome, I wouldn’t worry about the cost in all honesty as long as you make good memories from ownership and enjoy it then your in for a win!

Welcome lad, sounds like you’re having fun already! 😀

Welcome! 🤗

That’s blown the hub seals. Check your breather pipe on the axle to see if it’s blocked . Check the bolt itself as well. I know you say you checked them,can you blow through the pipe? It’s unusual for the seals to go.unless you had cheap ones...

Hub seal leaking onto the disc and backing plate then dripping off the lower swivel pin ? Oil in swivel rather than grease? Regardless of that best not drive it with it on your brake disc.

I have Kev im struggling to find a pre facelift with a 15P TD5 in it

Everything working fine, thanks for your assistance

Hi all. My 2006 Defender had a full axle rebuild around 4 years ago and has done little mileage since. The left side has cracked and blown the dust cap, and is now leaking oil on both the front and rear of the wheel (suspecting its a hub oil seal...

Not just the L322. I would go as far as to say: The P38 is different... to every other car! Man that is a complicated arrangement! @Flossie - Stand really still and don't do ANYTHING until you have a new battery! :)

I've managed to getvthe sat nav to work. It's not picking up my current location. It actually picked up the location I broke down at so I am just wondering once I put it all back together you can manually set your location or maybe I can drive...

Discovery 3 2.7 tdi v6

It could be a setting up port for the factory 🤔

Ooh, I hope not. It may just need all the bulbs replaced. 🫵

I wouldn't have thought so the system self bleeds with the in tank pump running.

Okay, back from trip and hoping to tackle some Defender maintenance this weekend. I am attaching more pictures. I am thinking of cleaning everything up and replacing the valve (rocker) cover gasket and adding some copper washers to the bolts that...

Put nail varnish on em...😜

Could the bolt be a bleed nut?

Bet the engineers didn't know either. Just thought it looks nice. Rustic...

hi all I have just bought a 2002 4.6 p38 and only half the digital display on the instrument cluster lights up so no idea if or how many faults it has! is it a bulb or was this deliberate sabotage by previous owner?

No idea for the other bits kiddo🤔

Is there any connections go into theses 3 sockets?

Right. I just went ahead & did it; 90NM for the threaded inspection bung, 25NM for the inspection bolt & 45NM for the delivery value holders. All went well. FYI: I didn't torque it up like this. I had the steel end nipped up in the vice not the...

Thanks again I am sure all it's current issues will be there!