Latest activity

Hello all, it’s a big day… please see the video attached, a friend of mine, a Land Rover fanatic came along, with the car having sat for so long he said, ok, first things first, let’s drain the fuel and get some fresh stuff in there… so , we did...

Exactly. Tub. Seat box and sills, then bulkhead. Best do doors windscreen and roof before finalising the bulkhead.

Hi all, hope you are having a nice day! I gotloads of brownie points when W got home today, so worth all the cleaning up and "grass mowing" I did. Since she had to be up at stupid o'clock this a.m. she is now asleep on the sofa, so I am having...

Thanks for the quick response and advice. Looks like I'll be moving the tub restoration works up the schedule.

Seems they want it facing the front of the car... beats me as to why, but I'd go with what they say, they manufacture them after all, not me 😂

Think all measurement are from the rear tub as this is a fixed point & can’t move. Unsure of the measurements between tub & bulkhead(door gap) Bolts for bulkhead correct way,you can put a jack under the bulkhead & remove bolt back a bit to...

I've tested one of the motors you gave me with a 9v battery, spins nice and quiet, just tested the one on the car and it spins fine but is noticeably noiser. So I've just soldered your motor to my board. There isn't enough room to work on the...

Maybe not enough room for you but on the Grenadier they mount the spare wheel the opposite way round and have a storage area in the wheel hollow.

Hi all Finally at the stage of build-up on my replacement MAER chassis Series 3 SWB ( 1980) . On the bulkhead I had to replace both footwells and both A pillar foot brackets. Now loosely fitted the bulkhead to the chassis. Questions ( referring...

If it’s not leaking out underneath, then probably filling up the steering rack. Have a look at this

Good idea I think I’ll get onto that this evening. I think as an example of a tidy engine bay and chassis it’s really strong, certainly a stark contract from the one I sent previously. But the spec is very bare, and the cosmetic changes alone...

I'd very much doubt that you have a height sensor issue BTW. Just have a look in your 4x4 settings screen and see where the markers are for the wheel heights to confirm. As you say you can hear the compressor running quite a bit it must be...

That's quite tatty and the paint is flaking off which suggest a quick spray job after coming out of it's military career.

Leaking air spring for the win; it will effectively balance the pressure across the front so both sides will drop over night. They crack quite badly over time and when you lift them or do work on them it's usually the nail in the coffin (ask me...

So according to supplier they should be as red stripes. So the one in the photo is fitted wrong. If I understand the majority replies above, this would mean the opposite to the views presented. Am I understanding correctly??

I'd agree, soapy water and spray around any areas on the suspecte corner where ever you can see rubber. 👍

Sold elsewhere.

Hi. Did you solve this problem?

yes, you re absolutely correct, i didnt notice the T at the fuel cooler (or heater!). coolant coming from the heater matrix does not actually go in the fuel thing

Morning All. :D Drugs seem to be working, the pain in the foot is greatly reduced already. :) The care & usage label on the drugs runs counter to the Drs instructions and warns of possible kidney damage. Dr. said take 1 tab 2..4 times a day...

Thanks, I believe it is with fitting,which I would need as I'm not a mechanic or even DIY mechanic