Latest activity

Last time I went for parts from my Landy dealer the kid pointed out the car was considerably older than he was and he generally only sees JLR cars still under warranty because the dealer prices are so high. Fair point!

Dimension request! I'm going to fit a 3/4 hood to my 109 truck cab. I need to fit the front rope hooks to do that. Does anything have the distance between the fold of the door frame and the rivets? Much appreciated!

Sounds plausible.

Classic fail that. Ran a 10j petrol for many years and had a couple of changes for that reason. Recon all there is to do is clean it up and renew. I never used new head bolts, just made sure correct torque sequence done in stages up to 90lbft [...

Pro Evo+ seem to specialise in JLR and are based not far from me in Abingdon. Guess that's their office and everything shipped from China? https://proevoplus.com/#about-pro-evo 24 month guarantee on all products, apparently. Tempted to pop in...

Done a post search and it is this blend motor that was playing up, I fitted a new pot and it was fixed until now. So... either... 1- my soldering leaves a lot to be desired. 2- the new pot has failed. 3- the motor has died. Question..nano says...

Dunlops a bit pricey but Proevo+ about right. Never heard of Proevo+ before. Not sure I'd risk them over Dunlop, not even being 30% cheaper!

Thank you. Will give this a go too.

Terrano?

I use Dunlops on my L322 and haven't had any issues but that said, I didn't have any issues with the old ones... Until I did. Have you looked at Maltings? They have them on their site here...

That's the guy!

Let me get the bag and see what's in it!

Some more recent crossmembers have the tab fitted the defender way, avoiding the need for a spacer.

Value is in RAVE. I thought it was 12 thou of an inch but I might be mixing it up with something else.

All a learning experience. Honing tools on eBay.

Morning All. :D Funeral was fine, very well done to all. :) Awful day & night, as I appear to have gout in the big toe on the right foot. :( May try to get to the Drs. for some meds. :) Have a good day. :D

hello everyone . 3 half years ago I rebuilt my 12j engine . This was a full nut bolt gasket everything done job . Crank polished Block skimmed & honed “020” Head skimmed& valves polished Injector pump rebuilt Cam & followers had minimal...

That is a severe leak isn't it? TO have the water splashing on the door panel like that it may as well have the window open! I think you need to give it a bit of a hosing with a friend sitting in it. Have you cleared the drains out? I've...

Yeah it works now

Arrive tomorrow. Fit at weekend. Yours needed to be done last month 🫣

Hi Guys! A friend of mine has a Land Rover Specialist Workshop in southern spain and is looking for talented Land Rover Mechanics, anyone interested please get in touch :)

+1^

@dubloman 👍

Setting back the distributor after engine rebuilt : TCD ok, the oil pump notch is pointing 10 to 4 to match with the distributor, the rotor is pointing at about 5 o clock but the cap shows the number 8 (near the clip) and not number one ...

ring gaps equally split...? What do you mean exactly with that? That their openings are staggered and not in line with each other on the piston? Black marks no not really, scoring stripes yes. marks no. No i have not honed the bores, i havent...

Like most specialists and dealers

A girl in overalls... And a nice young lady in dungarees.