Latest activity

Hello everyone. I need some help! I have inherited a Series 3 2.25 petrol. The vehicle last started in 2020. At the time it was being driven when it cut out in transit. It would not restart and was towed home. Its owner has passed away and I...

Nothing that a good few bits of time with apolishing kit shouldn't sort out. I'm tempted but in the wrong country. :(

If you are concerned about the look then fit a spare wheel cover and it will look original. This is possibly what I would be looking to do anyway just from a security point of view. If you make it look like a spare wheel rather than storage no...

It’s taken 436 posts and 22 pages but I think we’ve successfully proven that no one on this forum is helpful and that OP is by far and away a high value individual and we’re all betas. Now to match his post length with some AI drivel: Ah...

But does it start ok?? I found that over 1V is dropped in the immob module. One of my vehicles has a button feed straight to the starter for cold weather and even when the battery won't operate the starter via the immob, the button does !! Charge...

not the best i know but still gets me 100 psi plus. havent ran this engine much so i hoped it would wear itsself in a bit since i gave it new rings.

Hi all, The seat bottom in one of my inward facing rear seats has just collapsed, which has spurred some further thought. We’ve got another little one en route and we currently always have one of the adults clambering in the back whilst the...

New battery in. What should be a five minute job was a swine because of the clamp bolt but it's done. Had to reset an SRS error but on the plus side. Gear changes are smooth as silk now.

You said "Divorced did you say? Work for yourself because no one would employ/work with you did you say?" I just paraphrased what you said because I could not be bothered looking it up because this whole thing is just a massive gotcha joke. I...

If I will not be able to get the old bolts in, then I will know immediately that there is a problem, and there is no way I will discover this problem while driving in Portugal. But you repeatedly have said that I will not discover this problem...

Looking for a BFG KM2 Mud Terrain 265 75 16 Anyone got one?

gents, i found SOMETHING. if its the thing were looking for id like to check rn. cil 4, score mark which alligns with the skirt of the cillinder. hard to see but there is a longitudional line and a little hourglass shaped mark on the piston...

I don't actually remember saying you were self employed because you are a horrible person.

Might have been @backinblack that did the guide?

Sure it is in the TDC hole? A skipped tooth would cause issues. The cam is set with a 12 thou spacer when tightening the cam stretch bolt. 10 mm is way too much.

I wouldn't touch Arnott 2. Had manufacturing issues recently. Arnott 3 are good but not worth the expense. Dunlops are best bet.

I might have a bag of them somewhere.

Right, the bolts will be different but there will be no way to know that the bolts are different until I am halfway to Portugal. And you say that I have no mechanical understanding, OMG you are hilarious. Let me guess, the bolts are of an...

Works for me?

LR could make some cash back then off ABS/TC/HDC being an option. At least on the basic models, it may have been standard on others. They probably still make cash with TR options, the sort of options over standard TR that 99.9% of users will...

Yes, I gave you a valid Google search response that answered your question and you decided to attack it and attack me. But the Google search was correct, it is correct, and it will remain correct into the future, answering your question. I sent...

Even my Freelander EV has ABS. :confused:

Well then folks. Looked at the reciept for the last work done and the master cylinder was 100 pounds for the part but doesn’t say what brand it is. I’ve looked round the MS today and there’s no leak of fluid as I Previously thought and the level...

And still not one single gotcha comment has got me, but you losers cannot stop trying. Given that I have mostly been responding to insults and gotcha comments and we are over 400 comments it must be at least fifty gotcha comments that have...

You are likely right, new ignition switch needed. Mate had a 2008 model and his went faulty just getting stuck and not turning. As yours still turns a new switch unit can be fitted. 2 small screws hold it to the key unit. I think getting at...

Il do it one at a time ,take pictures, and following the guide. What can happen if you muddle them up?

And like I said, if the bolts are different I will see that immediately when removing the first one that is different and I will be able to order new bolts before I continue. This is just childish stuff compared to an actual problem, like if the...

I already did before I commented to you about your mistake! Oh no another gotcha failed. How many is it now? Can you see how pathetic your life is that everything revolves around me writing the word "not" versus "no" after maybe 200 comments...

Gorra a full one sat in its plastic housing along with driver for £35 :rolleyes: