Latest activity

Haaaaaaaa!!! Yes my 23 year old Range Rover is uniquely different to BMWs from the same era even though they are using BMW running gear! Even though the engine in his BMW is a higher displacement version of my actual engine, and his car is from...

I have just replaced the compressor in my P38 after it recently dropped to the bump stops , it still will not rise and the new compressor is very hot. It's not a hard fault as I have no lights on the dash and the eas switch doesn't have all 4...

Just in case anyone is sufficiently MASO to want to read his piffle on the other forum: https://www.rangerovers.net/threads/my-crazy-diff-ratio-change-idea.370261/

Except I have said so many times here that I am not towing and I am not putting a roof rack on and it will just be me and my dogs. So for my situation it is a great idea, which I explained in the other forum. So you ignored my explanation in...

I do not need to post pictures of differentials here that I can see have identical mounting points to then have other people here tell me that they are identical. If somebody wanted to see that themselves then I already told them what the...

The rest of that thread went extremely like the one on here!!!! But the other one that did it and said it was fine was NOT doing it to RRs!!! "Actually, on another forum someone said they had done this to three cars and it worked out great for...

Yes, rev counter, speedo is removed, everything else is still in place.

So this is the person that knew a person: "I know someone that did a similar thing, because he had a long daily commute. His only complaint was poor acceleration at higher speeds. However, he drove solo with no cargo. If you use a roof rack, or...

Is the pump running for the washers? The strainers will often clog up and although it tries to operate it may well not actually be able to draw any fluid. If I were you, I'd try a test lamp on the connector for the pump before you go too far as...

Or RETIRED you dumb@ss.

Decided to brave the heat and strip it down. Question if I may... I've got the clock cluster unplugged and out. Ign has been off for a couple of hours, is it safe to put the ign on to fiddle with the , now removed, blend motor? Or will the srs go...

We are entitled to breaks don't you know, having one at this very moment

So you've suddenly found 3 more cases of this? Funny you didn't mention it before. :rolleyes: Links please. And if this really is the case, why don't you naff off and do some work/ get on with buying them and changing them/ find a life for...

These any use?

The information here is available by searching previous articles. Any new questions will be attacked for being stupid even when it is not. So I will not waste my time asking any new questions here, but I still have access to all of the previous...

My daughter has a 2010 Discovery 4 HSE and there are some electrical issues that may be related. Specifically none of the washers work, but neither does the horn. I am not sure what else might have stopped working, but these two are important. I...

Hi I am wanting to replace the 3 seals on the FIP on my 97 p38. I had a discussion with someone on here who posted a step by step guide but I can't find it for the life of me. Can anyone help and guide me back to the link. It's the 2 from the...

:handbag:

Just responding to dumb personal insults with laughs. I will continue to do this until it stops being funny. Each day I think I will get sick of doing it, but each day I find the new pathetic insults and gotcha questions still funny!

The glow plugs are new last year and about 1,000 miles ago. That’s not to say there couldn’t be an issue there. There’s about a third of a tank of fuel in it. I have a hand primer bulb fitted before the fuel filter, so I can confirm that the...

And I am OK laughing at these guys. I am not laughing at you because you gave me valuable information. I literally only glance at this forum for five minutes a few times a day, to see if those guys have finally shut up, or if they are still...

And that is why I am still here, because you guys are still pathetically funny.

Actually, on another forum someone said they had done this to three cars and it worked out great for them on all of those cars. And someone knew someone who did this on a car and it worked out great. So that is four cars out of four that it has...

Battery tested. It's duff. Just gone to get a new one and tried to fit it. That's not gone so well. I have the old favourite of the clamp bolt not coming out due to the captive nut spinning. Chuffing thing :rolleyes:

Please don't waste my time, I already got the answers to all of this, maybe three days ago, and I'm not interested in telling anybody here how this works out. The question regarding the possibility of this working has been answered twice, on...

Haaa!!! Thank you for being such a pathetic loser. Yes, you are right, every person who has their own business only does it because they can't work for less money while being told what to do all day long by somebody else. Now here is an...

So coil packs and plugs changed and the car starts and runs smooth. Still has engine light on and HDC light on when running but the OBD port still doesn’t allow access to clear any fault codes. Still won’t move out of park with engine running or...

Previous owner had the pump changed for the same problem just before I bought it. He thought it was fixed until he filled it with fuel the morning I went to collect it. He then went on to knock £500 off the price along with giving me a full tank...

I’ll have a look and see what make it is. I’ve noticed a slight weep of fluid from under the reservoir , there looks like a small split pin And washer where it’s coming from.

Cycling the ign didn't work , then the blower wouldn't speed up then I remembered that I hadn't put 'back to ecu control' on the nano but then the blower speed started to respond without plugging the nano back in again. Might strip it all down...