Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • Propman
    Propman replied to the thread I would just like to say.
    Possible, but not certain: The square labeled U: May represent the relay or contactor coil. Which energises a device. Square with 8: This could indeed be a thermal relay.
  • bokko
    bokko replied to the thread Bit smoky after 10 years.
    Thanks chaps. I’ll let it run for a while and see if it clears, although I might wait till the neighbours windows are shut 🤔
  • Joseph80
    Joseph80 replied to the thread BULKHEAD.
    Hi Thanks everyone for the replies much appreciated, as I am not a great welder and precision is important, do you know anyone in Hampshire area/West London area that can restore my bulkhead. There are lots in the North but wanted someone in the...
  • H
    Hicap phill replied to the thread ignore thread please.
    Iv ignored the invisible poll as well
  • Freddie17
    Freddie17 replied to the thread ignore thread please.
    Fancy posting questions in a thread that everyone ignores… 🙄
  • Hippo
    Hippo replied to the thread I would just like to say.
    Is the 8 inna box a B. For bimetalic strip. Its the item controlling the contacts its linked to.
  • R
    I have no concern for how I seem here. I asked a simple question and I was insulted and attacked from the start. Those people will never change their opinion of me, especially after I called them out on their ridiculous behavior. I will not...
  • R
    I think you are imagining an extreme situation and not looking at this in reality. For example, someone else said that the oil pressure would be lower and that would damage the engine. But I can drive now at 40mph at the same approximate revs...
  • AllanWorms
    All the info online, is vague, at best. Much is somewhat contradictory, too Also, IGNORE the Google AI overview - it's wrong (I wish I could disable it permanently, instead of putting a profanity in every search). It's wrong most of the time, on...
  • AllanWorms
    AllanWorms replied to the thread Mysterious coolant leak.
    You can't use the temperature gauge for anything useful. For one thing - they ONLY works if the engine is full of coolant - once the sensor isn't IN coolant, it move change anyway... That goes for all cars. You might also need a better mechanic...
  • T
    ThomasLRNL replied to the thread nasty knock, any ideas?.
    ok i will double check the liner tomorrow. Yes, but only when i held down the pushrods and spun it with a drill. where the speed became so great that i couldnt quite hold the whole assembly tight anymore. yes i have and it did not amount to...
  • T
    ThomasLRNL replied to the thread nasty knock, any ideas?.
    i have taken apart the whole head and lapped the valves. i know the springs aint broken i inspected those. thanks for the rocker reference picture! will compare tomorrow.
  • miktdish
    miktdish replied to the thread Well, I never ........
    Useful, in the winter, almost neccesary for those who have fitted LED headlights. They will need a heater system to warm the skush though. I'll just stay with the two 55W heater coils I keep behind the glass.
  • steve2286w
    steve2286w replied to the thread nasty knock, any ideas?.
    almost Same one imperial one metric , nigh enough for pitwork as the saying goes
  • T
    ThomasLRNL replied to the thread nasty knock, any ideas?.
    10 thou…? i took .25 from the manual…
  • D
    Hello Everyone Picked up Discovery 4 so tough I'm going need some forum members help at some point in my ownership due to nature of the beast so why not join in. Been honest I was looking at them for 2-3 years and alway put off by the shear...
Back
Top