Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • the_wolf
    Drop arm balljoint done. Absolute piece of cake of a job, especially when you've got the right tools. Dunno what all the faff is about lol. New panhard rod bushes pressed in and that'll be going on tonight. The Febi ones are great quality and...
    • 20250709_222531.jpg
  • kevstar
    kevstar replied to the thread Long shot but…...
    Have you tried the v888 form from the dvla ?? You need a valid reason for requesting the info. :)
  • tottot
    tottot replied to the thread BULKHEAD.
    For a 65ish year old bulkhead that is not at all bad. Door pillars have been done before as those are series 3 type. Better because they have clips for the wing bolts not captive [ usually for ever ]nuts, different but can not be seen once the...
  • Mark Piercy
    Mark Piercy replied to the thread P38A Tuning the 4.0 thor.
    I simply swapped the radio for a modern unit, gaining the microphone for calls as well and then traded the old unit for some bits. There is a mod on the YouTube that is a little more involved than I wanted to be. 👍
  • L
    LR-hobbs replied to the thread P38A Tuning the 4.0 thor.
    Do you have the original radio or have you swapped it. On the discovery 3 radio you could add in Bluetooth, wonder if it could be done to the p38
  • kernowsvenski
    kernowsvenski replied to the thread ignore thread please.
    Just checked in for the day to see how it's going. There is some serous ignoring going on here folks! Well done, and more strength to all of your elbows. Keep it up! Anyhoo, I'm going to ignore for night I think, and probably tomorrow
  • E
    Hi all. Don’t own a Discovery, but joined hope because….. In 2009 I purchased the registration E5 NEM and put it on my Audi A4 Avant. For numerous reasons I had to sell the car before I could transfer the plate off. This registration is...
  • kevstar
    kevstar replied to the thread I would just like to say.
    You got the runt of the litter 🤣🤣
  • kevstar
    kevstar replied to the thread I would just like to say.
    Hippo going out to play with the squiggles
    • 1752096191096.png
  • kevstar
    kevstar replied to the thread I would just like to say.
    I was in Egypt & was touching cloth so I had to go n use one of there drop toilets......chap sat outside covered in flys :oops: giving you loo roll aye 1 bloody sheet, I said 1 sheet ?? he said yes its to clean your finger once youve cleaned...
  • Mark Piercy
    • f2c28d76d0bd0c1d606f663e517e4ca1.gif
  • R
    Actually as I have said, I have seen other people ask questions here, get abused and then just disappear from this forum. So things have not been ok for a year. The only difference is that I didn't disappear, I have stayed to point out what is...
  • ChuggyFreelander
    @Freddie17 has kindly been round - here are some screenshots .Thoughts appreciated... injectors, as expected, plus MAP sensor. Have included 2 photos of injector readout. P1613 MAP Control code reappeared after Freddie cleared the codes that...
    • IMG_1814.jpg
    • IMG_1816.jpg
    • IMG_1817.jpg
    • IMG_1818.jpg
    • IMG_1819.jpg
  • Mark Piercy
    • f2c28d76d0bd0c1d606f663e517e4ca1.gif
  • Mark Piercy
    • f2c28d76d0bd0c1d606f663e517e4ca1.gif
  • RangeRoller dt
    We all agree on one thing. Everything was fine for atleast a year. Until he opened his mouth….
  • R
    Why would I go elsewhere when you clowns are still coming here making your ridiculously stupid comments? I have been reading this forum for a while, because I do not know everything. I mean think about that for a minute, if I knew everything...
  • R
    This is after you have insulted me and abused me for two days, it's my fault?
  • R
    Except these are for sale because they exist, and they are for the 8 speed so logically they have a lower ratio. I do not need to see an official piece of documentation to know that something exists when it has been mentioned all across the...
  • kevstar
    kevstar replied to the thread Track rod joint covers.
    Iirc they were from Gwen Lewis about 30 quid. If he searches for polyurethane ball joint covers. He'll find them. :)
  • J
    j_g_uk replied to the thread D4 rear door problem..
    The part I’m getting quoted for includes Range Rovrr Evoque as well. I suppose it must be right…
  • pwood999
    pwood999 replied to the thread My crazy diff ratio change idea.
    You said you’ve been on this forum a while. Clearly you know it all so go else where please.
  • Mark Piercy
    Is there anything to lube the o-rings, they are very resistant pushed in dry... Nod nod 🫣
  • Mark Piercy
    • f2c28d76d0bd0c1d606f663e517e4ca1.gif
  • Mark Piercy
    • f2c28d76d0bd0c1d606f663e517e4ca1.gif
  • Mark Piercy
    • f2c28d76d0bd0c1d606f663e517e4ca1.gif
  • D
    Been through everything google search has given, thats how I ended up on this forum :p. I know that the easier way to do this it to: keep the 300 tdi cluster Swap the pedal box from the 300 tdi disco Front and rear body mounts should line up...
  • bankz5152
    bankz5152 replied to the thread Track rod joint covers.
    Gywn lewis do new covers. Much higher quality
  • R
    Actually I have seen many people leave this forum after being insulted and abused by the arrogant regulars The only difference is that I stuck around and didn't bend over. So in fact this is quite a good representation of this particular forum...
  • R
    That was only in response to you saying that I would never find the answer here implying that if you didn't have the answer then nobody would have the answer. But when I came here I knew that it was possible that somebody might immediately have...
Back
Top