Latest activity

How steep is the hill your parked on? Half tank, quater tank or full tank of fuel? Any diesel smells from under the bonnet? 🤔

The latches on all of them are rubbish, freelander/d3/d4 I think are all the same part numbers, but pls check first!

No apologies necessary, you have now (and in the past) been a gentleman and an amazing source of information, to myself and to many other people over many years. In the year that I've had my L322 I have read many forums online to solve both...

Thanks for that, much appreciated.

You want all your posts about milk-floats removing?

Do you know the registration number? If you do, a good start would to search “check if a vehicle is taxed” Then go to the dvla web site where you can put the reg number in to see if it still on their system. If it is recognised then let us know...

OMG I could find a 15-year-old that understands that if Google says something then you can just follow links to more in-depth articles to get the full information. The image that I showed you first told you that the 2.76 diff came from the 4.4...

One of the pipes looks out of line kiddo, once they're both placed the aluminum bracket on the rear can be brought towards the collar with the screw through it and nipped up. My advice, (although not worth shït apparently) walk away have a few...

What's the secret to getting this clamp and screw back on the heater matrix? I've been at it for hours, it's kicking my arse Is there a certain way the clamp is supposed to sit on the matrix?

Actually, having given this some more thought, I’m talking rubbish. You can see that the lip seal is installed into the shift motor the ‘wrong way round’ i.e. the front of the seal first, because it’s there to prevent the transfer box fluid...

2003 Freelander 1 TD 4 . After an engine change a year ago my car is sometimes difficult to start when it's been parked pointing up hill . I really don't know if the up hill parking is part of the problem but if parked flat or pointing down hill...

Mine used to leak from poor seal on sender unit when overfilled

Yes. I watched for that. It was not the issue Yes. There was no overflow from the filler. So I'm going with a hole in the tank

Having stripped my Landy down to chassis and bulkhead to find out that the vehicle was sold as refurbished chassis and Bulkhead etc, including engine, which was a joke. Had to buy myself a chassis but now looking for a Series 2 Bulkhead, does...

Yip, they look pretty bad. I had to patch up a hole in my wheel arch behind the arch liner. Mud and dirt gather then stay wet and salty from road salt causing rust.

OP might want to consider also buying the rubber pipe that connects the filler neck to the tank.

We just bolted our in aswell.

Replaced track rod and ends last Aug. Noticed today the rubber covers have split already. Cant be right, unless I just bought crap ! Suggestions for replacement covers please. 2008 110 commercial. Cheers all

But what happens the morning you are having a particularly reluctant poop and you can’t sit with your feet up against the door? And if you over ‘pushed’ and passed out, it could get messy if you’re only squatting 😳😳😱😱

Please feel free to enjoy all of the information from this attached image, which is as much as shows up on my telephone. Maybe you can do the Google search yourself and learn something for yourself. My main point was that the information was...

I don't think anyone is against me, you guys do this to a lot of people who post here. I cropped an image from a screenshot without thinking about it too much but actually if you did the Google search you will find a page of information that I...

Thanks. But where would it over flow from? I would see it correct?

I counted about 15 knocks in 5 seconds that’s 180 per minute Assume tickover speed about 720rpm, so cam speed is 360rpm Does it sound noiser with ear to air intake After rebuilding my 200di I had a regular clonk like that , turned out I stuffed a...

Thanks for replying Tim110, but changing the car seems a little O.T.T. I would prefer to try and fix this one. The ecu is food for thought though.

I might have to ask a 12 year-old girl to explain to me the meaning of your meme pictures that you like to post here. The fact that none of you understand how rude and condescending you are and how unhelpful you are is what makes this situation...

ah all sorted thanks guys. i undid one of the nuts holding the switch on and out popped a nipple :)) bit of wd40 now lights on when it should be and off when not. Thanks very much for the help

I appreciate real feedback, I just don't appreciate patronizing insults. That's the thing that you have never understood and never will. If people had said something like "I do not know if the diffs will fit, but you might find the acceleration...