Latest activity

At that mileage springs will not be a problem, the known weak point of these engines is the camshaft, so you might want to check that out and the oil supply to it. When you measure the springs they will be bound to be slightly compressed...

Anyone that needs to buy a Nano nows your chance. Doriz has one open for all p38s

weird though, since i redid all of them

yep agree

I do not know this differential and I cannot see from the pic down the hole where the flange goes. There should be a nut underneath all that, that holds the pinion in mesh with the crown wheel. If there is and I am pretty sure there must be...

Thanks for your advice, measuring the springs makes sense – I will find the specification

It's hard to tell from a video. Get a stick/rod mechanics stethoscope to isolate the knock. Sounds cam shaft speed, not crank shaft speed.

I feel you - was there a couple of months ago!

That's where it belongs

Removed full front suspension and arms passenger side and drivers side

Hello Stanley ! Are you talking about bolt no. 8?

Absolutely hideous and sacraligious 👎

??

This would be very appreciated, but a lot of the information this would contain, could also be considered common knowledge. How to treat a rusted bolt is tricky, but should the guide also explain how to use a induction coil? Or just how to do it...

Looks like something that will be found parked outside the schools and shops, not working in a muddy field.

Yes, there is a ‘picture’ elsewhere on here… From what I’ve seen, it’s nothing like a Freelander, and is undeserving of the badge.

Cheers … I’m waiting for the coil packs and plugs to come. Hopefully fit on Friday and see what issues it’s showing. I drove home with the windows down when I called the AA and put them ip and locked the car while waiting for him. It was after...

Yes back-probed the connector, and did continuity tests on the wiring, plus checked voltages at the ECU end.

Got loads of metric sockets and also still have a couple of sets of AF.

I need to fit a Cat S5 tracker to the camper as soon as it gets off the boat and gets its MOT / UK plates.... who does everyone recommend for the new Cat S5 trackers...? Both which tracker and which companies you recommend to fit (Yorkshire /...

Well maybe you're right, then. I should forget about a respray and just get it jet-washed, T-cut and waxed for 500 quid or whatever they charge these days. The interior is actually quite good, just rather grubby but that too would certainly clean up.

Did you back-probe the fuel rail sensor to test it?

Cable labels

Morning all, In the process of rebuilding the dashboard after installing new heating matrix. I have 1 cable I have no idea what or where it connects into. Any help would be much appreciated please see attached picture. Thanks in advance

No, I don't go in the Tratter section.

And? I gave a technical answer. Do you complain about @Hippoo's squirrel grooming thread in the tratterer section?

Adrian Flux have just pulled some magic out of the bag so at least bringing the camper home feels a little more realistic.... bless them

Hello All, Anyone had that noise on his/her TD4 already - TD4 ? First it was when the air con was on. After a while of driving it turned also up w/o air con. It seems to come from the air con belt or somewhere there. As I was a bit away when it...

Technical Forum.