Here is the picture of Head and block. I have already installed a coolant sensor and clear coolant reservoir. I think it didn't had head gasket leaking but may be cracked inside by the valve seat
I noticed there was a lot of play in the rear shaft, so I looked.
A damper is damaged and allows the play :
The damper seems new, but I don't know if it has been changed recently. I just know they changed the rear shaft joins (these things ...
Simple bluetooth OBD reader combined with Torque app should allow you to see all readings on a Thor engine. EDIT: iPhones don't like Bluetooth.
Nanocom tends to interrogate each chip separately hence the weird grouping sometimes.
Semicolon is the European default. Makes sense really as they use commas instead of decimal points and that would mess up the number of columns.
In Excel just highlight the column and then ALT, D, E. (Text to colunns on menu).
Only thing I know about private plates is that you cannot make a car look younger than it is, for example putting a 51 plate on a '95 N plate. You can of course put a '95 N plate on a 2001 car.
I think transferring the plate is simple enough but...
They is the one wheel off test.
I didn't know which lenghtof lever and which force to apply, so i made mark at 1.20 m and applied a force by hand thatis a bit less than 17kg (in comparison with 17kg water bottle test I also used, but I struggles...
Got 4 codes
egr which is gone
Cruise control Unit
Vehicle speed sensor
Prefeed pressure sensor short circuit b+
Just for reference it’s gonna be a Standalone engine so I’m running it on the foor at the moment to text and the drivers wish is...
One firearm i own (i own a lot) is a 22lr which has a sound moderator (silencer) and is deathly quiet when used with subsonic ammunition. A fart is louder. This is my go to rabbit rifle but i have used it on crows on farmland with plenty of...
Thank you.. near Burnley. No RAC just took me back to where it was repaired and told him the fault was the bent bracket and hose due to clutch fitting. Only reason i had it all done because it was such a good vehicle, proper reliable. now it...
Who recommended the garage that undertook the original clutch job, was it the RAC if so complain to them that the garage as made your car worse, will they help and intervene? where about are you based so we can give you some idea whom maybe best...