Latest activity

Thanks Phil...I can put the worry beads down.

Its a technique called photogrammetry. More here: What is Photogrammetry Disclosure - I run the company along with my business partner.

Been hammering it down this morning, its been lovely for a few days. I might have a day off. :) Tools need putting away as they were just thrown on top of the pool table last night (got a wooden cover on it) Peeps came round for a few beverages...

So at this point I've had the jets out several times, cleaned the float bowls, put it back together. Then on testing it I found the idle cut-off solenoid seemed to be stuck out, so changed that for the one on the old carb that worked fine. I...

3D model is fantastic ... How is that done ?

Was double posted. :)

That A frame cross member would have been replaced like for like. Even has the 4 holes for a bose unit (sometimes on range roves & early 110 for a self levelling devise) Later models use a tubular type for the rear arms. There are some nice...

Thankyou for your reply but the link you enclose isnt loading properly at the moment. Will try accessing the site directly from the name you have given ;)

I appreciate they will probably need to see and inspect the vehicle but have asked for a rough "Ball Park" figure to give me some idea of cost.

You forgot failing to add tin-worms to P38's

200tdi crankshafts 300tdi cambelts td5 oil pump bolt d3 oil pump casing d4 crankshaft d5 crankshaft Ingenium camchains Proper quality!

Hi guys, 2006 Vogue with a strange noise. When I unlock the car, I get a clicking from behind the dash for about 3 seconds which then stops. Sounds loudest if I get my head by the vents under the stereo. If I start the car and operate the...

Morning All. :D Not here really, we just melted away in the night. ;) Have a great day! :D

A little bit is not the end of the world, a simple test is get the engine nice and hot, leave it ticking over and loosen the oil filler cap, then place the cap in its home but not screwed in, if it rattles around all is okay, but if it start to...

With Izzy's body off its time to start thinking about its future. As per the other thread, I dont think the current chassis has one. But that kind of depends on what modifications from standard have been previously incorporated, and how easy...

The internal bar doesnt really get in the way, if you have standads seats. Its rather annoying with Corbeaus/bucket seats. As for fitting doesnt take much longer to add the internal bar and obviously considerably stronger. Chat to SD if you get...

Big day yesterday as Izzy's body came off. Couple of neigbours and the lady of the house press ganged into helping did the job: A pressure wash shifted the dirt and revealed the good bits and horrors in equal measure. The fuel tank has surface...

Good point. Time for a compression test.

I can't tell if you're talking about the Chinese version or JLR's new vehicles... ;) I'm VERY wary of the long term life of new Chinese cars... but no more wary than anything new from JLR, anyway.

In that case, there should be a world wide recall of every vehicle fitted with the sh1t design fault. It can only be a matter of time before it causes a fatal accident.

This is where I got mine from. Looks like they are a bit cheaper at the moment… (they’ve never been the ‘full’ price!) https://eurosubframes.com/pages/product-result?rq=yr_2009~mk_landrover~md_freelander-2~jx_rear-subframe

They won’t be cheap (not silly expensive), but they certainly know their Freelanders, and will 100% be able to sort yours if it’s not something you want to tackle yourself. Sue and Norbert are great guys… and say hello to the dogs!

Eh?