Latest activity

I got a standard cheap one from Amazon, £16 I think? I needed quick delivery as it was purely for a test. But it works! I’m going to eventually get a facet style one off eBay as lynall suggested and chassis mounting it. Probably will have to be...

Google does… these ones? https://www.jgs4x4.co.uk/freelander-2-front-brake-pads-mintex/

Fingers firmly crossed: I think changing the relay has helped, if not sorted it! It's starting! However, I'm still getting a problem with the temp gauge. Earth issue? In less than 10 minutes, the gauge is climbing well towards the red. I'm...

Just to give you an update, I changed the drive belts for new ones yesterday and started up. No noise! Fingers crossed, I'll check again today for any noises. However, after running for less than 10 minutes, the termperature gauge was...

Try

Unfortunately it never came back 🤷🫣

Hi all, wanted to share a recent upgrade to my D2. I bought a full exhaust kit from a shop in Massachusetts (TWS)… they had great support and offered custom built long tubes and a magna flow cat back system with an ECU tune to match. Would highly...

What is the procedure to add the fluid correctly please?

Thought of that and as soon as it goes off go put with powerful torch but drive gs ayes closed, long drive and no signs of intruders to date. Thnk U

Agh, I do have a moth problem with my security camera so that is a possibility, will check that out thk u

Story - bought 2005 RR back in 2022. The previous owner put a new battery from Walmart - EverStart H9, 950 CCA 3 month earlier. Year and half after purchase, beginning of 2024 battery died. Took it back to walmart and they replaced under warranty...

Cant we just give im some crayons or marbles to eat instead.

Quick update - a friend of mine has a very big air compressor and blasting kit/gun. I've been researching and I've been reading soda blasting is good, which gives a good finish with the benefit that it doesnt wreck rubber or wiring etc...

Never knew you could glow in the dark fluid for oil and fuel - that is genius! On it!

Also check with a long straight edge that all pulleys are in alignment.

Funnily it was the left one that he fiddle with, but this was in Merkin land where I understand they do not know whata roundabout is!!!

Finished off the bits attaching the wheel arches to the inner wings, these now feel much more solid. Then made up a new patch for the hole where the seatbelt mount had rotted out. I reattached the original reinforcement panel to the back of it...

You will regret only doing a section, cut it all off & do it properly. There is more prep than welding.

Ive done thousands of wheel alignments over the years also been on training courses bla bla All done by lasers sometimes its experience setting them up & not going by oem settings, even different types of tyres can act in setting toes in out you...

I was just replacing those ones with black poly bushes as I knew I'd be struggling to replace like for like without a press etc.

Yes. Will surely do some research next time. Learning the hard way😊

I reckon I may have found a big part of the issue. Removed the panhard rod and the bushes are completely degraded after only a few months so those will be getting replaced as will the radius arm bushes just to be sure

Ive been poured unlimited glasses of golden water from the Baps of Dura :p

Just been watching a Youtube linked from another thread about how to get your wheel alignment done. Why do Merkins always sound so patronising? About 24 mins of him pushing computer buttons and then tweaking the front toe in a tiny bit. Bit...

If the VC us a bit weak you will notice heat creep hitting traffic or lights after a run

Next time go to a tyre selling/fitting place. They are much more set up for it.

You poor, poor laddie! do hope the missus is dispensing tea and sympathy in large amounts. PS, what did you get for the one the neeb gave you? 🤣 🤣 🤣

I wouldn't mind so much but the charging timer was only installed a couple of months ago. :( At least it helps me remember how I installed everything in the first place. I spent a few hours rebuilding the HV junction box so it's almost complete...

Thanks you I shall invest in this