Latest activity

They is 'eathens norf of the wall, don't know what Easter is. (Choc eggs excepted). Edit; Easter was originally a pre-christian Anglo Saxon celebration, dedicated to Eostre, goddess of spring.

You can get stainless in different strengths, but the stronger ones are not cheap, in fact all special bolts seems bloody expensive at the minute.

Mine is not wallowy and can sit on a motorway all day at 80 if I wanted. Not sure what you drove.

Have a read of this by UP http://www.discovery2.co.uk/waterpump.html Griff

Hi and thanks for your response. Yes it’s been scanned by an automotive electrician who confirmed which ABS sensor was throwing the 3 amigos up. He also confirmed it was being hit by something in the hub and my investigation has shown it is...

100 seconds is very high. What weight and kength of bar did you use? If you lift the rear, do the rear wheels spin? Are the brakes or hand brake dragging? When you take the vcu and prop shafts oft, turn the ird pinion. If it spins freely then...

You can look up the exact part number you need here... https://parts.jaguarlandroverclassic.com/land-rover-freelander-parts/ Did you ever get Pscan or similar on it to check the sensors, as advised previously?

Thanks, points noted regarding strength will ensure I research appropriately

Hi, newish owner of a Land Rover Discovery 2 2000 pre facelift. First post on here after looking for a similar thread. I have a coolant leakage. After checking in the Haynes manual, the leak is coming from beside the coolant pump cover. At...

Hi guys. I posted this query in an old thread but had no response so am starting anew. I replaced both rear driveshafts about a year ago and it threw up the 3 amigos. I was busy and ignored it but now investigating and the ABS sensor is...

Yessdi tried very hard to get my noo windows 11 pooter to allow me to open my Mozilla Thunderbird account on it. I have checked the password is correct by opening it up un another lappy. I have also checked the input and output server settings...

The seabelt points on the rear tub are now drilled and ready for final fit: And the LH B pillar is done too: Just need an hour or three to get a clear run as the sealant wont give us a second chance. Time for a few patch repairs on the front...

Very, very light drizzle here too. You almost cannot feel it.

Raining slowly. Norrinuff to get water flowing in me garage guttering. Me water butts are fursty.

Oi! Oo pinched me injin???!!!

If you don’t have the kit or comfortable with fip time it up using Datas ruler method. 50-60% should be okay for now. 50 is ideal. Important when you retime it that the final movement MUST be towards the engine.

Not got a Bank holiday then, on the Bonnie Bonnie Banks??:(

well bit the bullet and purchased full LOF power clutch kit including new dual mass flywheel was a absolute pig to fit ,all back together but now it wont disengage have bled slave repeatedly so now going to change it for a new one and try again...

In Kenya, you need the twin 90L diesel tanks of the Landcruiser to give you 1000 plus kms of range… to be on the safe side! 😆

The spot weld are a lot bigger than rivot holes so I haven’t figured out which it’s the best way to do it , probably wait until the part I’ve ordered arrives & contemplate a plan

Just checked the bolt pattern and both have the same 3 bolts pattern. But I'm thinking it might be from a 2a alright, the striker appears to be a sturdier structure than the 'later' type.....

It is my opinion that in recent years Britpart have upped their game, doing more testing on the parts that suppliers send and rejecting the poor stuff. There is also the issue of " Fake" stuff. Had some Brake cylinders from on line site that...

Hey all, I’ve ordered that upgraded alternator recommended above by Woodie. Electrics aren’t my strong point. Someone tell me pls what I need to upgrade and with what wiring? My gut tells me at least the ‘output’ side? Too thick would actually...

Hi, 1. Does anyone have a complete parts list for series 3 SWB petrol Landry that I can upload please? 2. Also is there such a thing as a specific nut and bolts list available which shows/states specifically what bolt is needed as the manual I...

Have you checked the connectors for bent pins ?