Latest activity

Morning All. :D VERY Bright and Sunny here. :) Herself is still akip, and as she has had several poor nights I shall not wake her. :) Have a lovely day! :D

Jealousy will get you nowhere 😊

Shorry. *r** mobile.

Ditto @derwendolly ?

My car is a 2002 model and the shifter surround is not round. I added a picture for better understanding. If it is not combined, the process seems to be easier. I just don't want to do something wrong because of the fragility of the old plastic...

To me doesn't sound like something that is to 'internal' - eg inside the torque converter, gearbox or engine. It does sound like a dry/worn bearing, but also could just be something rattling, resonating at RPM - seeing the heat shield there -...

The whole vehicle, to see what condition it's in.

So I Recently went on a 400 mile trip (hasn’t seen that much use in quite some time) mostly on road to overland some trails in Kentucky US with my 2000 D2. After returning I drove it into town a couple days later and noticed some liquid on the...

I've had a roll of foam in the garage for years. I think it's called EVA foam. No idea where it came from but i'm going to use it to cover the dash. It's the same thickness as the original in most places but the edges need a double thickness to...

I was hoping to get the vinyl off the dash padding but still be able to use the padding again. I knew it was damaged but I wanted to try to repair it. These pictures actually make it look a lot better than it is especially round that bit with...

Anything specific you want to see ?

Thort cars like that had a water separator in the fool filter. Do appreciate that if someone put a gallon or two in it wouldn't save it. Had they had a falling out with someone?

Hello. Glacial progress continues. Might as well show you what little there is. Primer went on with brush and roller. So did the top coat. The finish is ok. I know a lot of people get fantastic results with brush and roller but I don't. To...

Can you not put one in the pipe coming from the tank to the pump? If there is a bit of flexible then you could just cut it and stick one in, no need to mount it on anything. (Don't forget to check the arrow for correct flow, easily missed.) SUs...

Got a photo of your motor.

In the dorm, after lights out, we made our own with pieces of paper and a glass on the lino floor. Worked reasonably well!!;) Can't beleeve some of the things people feel they have to buy ready made. :rolleyes:

We need a south east Landy day out for sure

What engine do you have? Depending on the answer, you might be able to retro fit air con. In hot climates this might be very welcome, esp for a dog. Some sunshades might be a good idea too. If you are hauling lots, some better shocks and maybe...

The noise definitely varies with input revs, so it's something that's spinning at input speed. When I looked at this before I noticed that in D but stationary the noise is still there. The interesting thing about D and stationary is that in that...

Take a look at companies like Foleys who build expedition vehicles for some ideas. Simple upgrades like seat risers give more legroom. A cubby box with a safe is a good idea. Internal window grills for the rear windows. A roof tent if you want...

Galvanised chassis are not uncommon but they weren’t fitted from new so it will be a replacement chassis unless someone has had the original chassis galvanised, which isn’t likely. The sills are aluminium if original, but chequerplate can hide a...

Did nothing with my car today, it had. day off while I got my bus engine in place under the bus ready to lift it in tomorrow.

Its not Pink, ya silly sally.