P38A Wiring the receiver

tarphenry · Feb 3, 2016

Hi all, Bought the gizmo to disconnect the transmitter,but I am very confused with the wiring. On the "in" side, I have 3 connections marked on com on and on the "out" side its marked + and--. i do not have a clue which wires to cut or where they go and as usual no instructions .Any help would be greatly appreciated. thanks in advance.

tomcat59alan · Feb 3, 2016

Connect the + and - to a battery and using a multi meter, check which connections on the in side make a circuit when the remote is activated. These are the ones you need to connect the cut orange wire ends to.

tarphenry · Feb 3, 2016

Thank you for that,really appreciated

tomcat59alan · Feb 4, 2016

Just reread your post and I think you will find on the "in" side it's on common on so if you use the middle (com) and either of the side on's you should be ok.

tarphenry · Feb 4, 2016

Many thanks

P38A Wiring the receiver

tarphenry

Well-Known Member

tomcat59alan

Well-Known Member

tarphenry

Well-Known Member

tomcat59alan

Well-Known Member

tarphenry

Well-Known Member

Similar threads