chrishoylandjsy
New Member
- Posts
- 6
- Location
- jersey
Here is what I have done so far so you can get the picture:
Fitted:
LED: side lights, indicators with led flasher relay, stop/tail lights, no. plate light
Standard fog and reverse light.
Issues I have:
The Trailer lamp is on constant as soon as the ignition is turned on.
Also:
The Landy had two towing sockets, 1 which had 3 wires B, P, GN which I traced to purple constant live, black ground and the Green brown was the reverse lamp and the 2nd towing socket was a standard 7 pin socket. The owner cut off both sockets and the small round connector socket as they were rotten without me being present so I have had to id the wires. the only ones I can't ID are three loose wires, white and slate, green brown and white purple.
All other lights work fine when turned selected.
hope this all makes sense
Chris
Fitted:
LED: side lights, indicators with led flasher relay, stop/tail lights, no. plate light
Standard fog and reverse light.
Issues I have:
The Trailer lamp is on constant as soon as the ignition is turned on.
Also:
The Landy had two towing sockets, 1 which had 3 wires B, P, GN which I traced to purple constant live, black ground and the Green brown was the reverse lamp and the 2nd towing socket was a standard 7 pin socket. The owner cut off both sockets and the small round connector socket as they were rotten without me being present so I have had to id the wires. the only ones I can't ID are three loose wires, white and slate, green brown and white purple.
All other lights work fine when turned selected.
hope this all makes sense
Chris
