Wiper Park Switch - how much dash to remove?

jeremyc · Aug 25, 2012

Thanks to many excellent previous posts I believe I have diagnosed a faulty wiper park switch on my 2005 90 XS.

However, I seem to have way more pieces bolted to the dash than many of the guides, including air con.

How much do I need to remove to get to the park switch on the wiper motor? Does the entire air con module have to be dropped in order to get the LHS panel off to reach the wiper motor?

hawky666 · Aug 25, 2012

on my 90 its just remove the cover on far end of passenger side.
Remove the grab handle part uppermost first, then the part underneath.
whole motor is just tucked away behind there and park switch is right at top and simply unclips.

jeremyc · Aug 25, 2012

hawky666 said:
on my 90 its just remove the cover on far end of passenger side.
Remove the grab handle part uppermost first, then the part underneath.
whole motor is just tucked away behind there and park switch is right at top and simply unclips.

Do you have air con fitted?

From what I can see the air con module is screwed into the "part underneath".

hawky666 · Aug 25, 2012

No i don't mate, but would have thought it should be easy enough to get around once you take the panels out as mostly its just screws or small bolts within dash.

hawky666 · Aug 25, 2012

Also, i should imagine air con is in next bit along as when i did mine last week i can be sure no aircon would fit in this end panel with it.
Give it a go. Only a few screws to find out.

Wiper Park Switch - how much dash to remove?

jeremyc

New Member

hawky666

Well-Known Member

jeremyc

New Member

hawky666

Well-Known Member

hawky666

Well-Known Member

Similar threads