Watch out! Compressor service kit

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
NEVER fit a new seal without a new cylinder. If the seal is knackered the cylinder has had it's best days.
 
mark1971 said:
at least you have a new liner! twin pack don't ;)
Click to expand...

Ah, that'd be it! Well spotted. Don't feel so bad now.

@Wammers: It all looked OK when I had it apart, to be honest. The seal was a little worn though and I'm going to do all the o-rings int he valve-block over Christmas so I though I might as well treat the compressor to some new o-rings too. That was I figured the whole lot would be done and dusted for a year or two.
 
wammers said:
NEVER fit a new seal without a new cylinder. If the seal is knackered the cylinder has had it's best days.
Click to expand...

But you'd advise getting the kit with the cylinder and not the twin kit without, regardless?

I'd have thought the teflon would be way softer than the ally casing but happy to go with your advice?
 
My typing isn't much better than my mouse work. When I look back up the page I seem to have hot half the wrong letters and the spaces are like a game of pin the tail on the donkey!
 
Grrrrrr said:
But you'd advise getting the kit with the cylinder and not the twin kit without, regardless?

I'd have thought the teflon would be way softer than the ally casing but happy to go with your advice?
Click to expand...

The alloy cylinder is anodised. The Teflon seal is running thousands of cycles across it every minute. Seeing as the hard anodising is maybe 3 to 5 thou thick it will eventually wear away and expose the softer alloy underneath. Up to you your money.
 
wammers said:
The alloy cylinder is anodised. The Teflon seal is running thousands of cycles across it every minute. Seeing as the hard anodising is maybe 3 to 5 thou thick it will eventually wear away and expose the softer alloy underneath. Up to you your money.
Click to expand...


I agree entirely : let me give the short version. Reconditioned the pump/seal/orings a couple of moths ago.......didn't do the cylinder....seemed ok.
This week I fitted a new pump......'nuff said.
 
You must log in or register to reply here.

Similar threads

ar1g3
P38A Which EAS repair kit to get?
Replies
18
Views
2K
Grrrrrr
Grrrrrr
feyniriel
If you start feeling irregular vibration that comes and goes on P38, it could be the EAS compressor!
Replies
6
Views
444
Grrrrrr
Grrrrrr
M
Sport ACE bypass for RR Sport 4.2 Petrol SC
Replies
12
Views
3K
mikesavva
M
W
FL1 TD4 power loss and smoke
Replies
15
Views
1K
Wiggsy
W
feyniriel
P38 EAS problems
Replies
18
Views
2K
pwood999
pwood999
Back
Top