undersealant

jabbae46 · Jan 20, 2013

Morning all, i am after sone decent undersealer to do the complete underside of the disco and the arches, can anyone suggest some good stuff

discodrivercumbria · Jan 20, 2013

Waxoyl, warm it up first, imerse in hot water or ontop of a rad for a while, schultz gun and an air line best, try to get into all the chassis first at all angles, then the out side,
give chassis a bloody good clean off first though,
ive got mine to do but gonna wait till it warms up
then it's going vertical with the help of a telehandler

jabbae46 · Jan 20, 2013

discodrivercumbria said:
Waxoyl, warm it up first, imerse in hot water or ontop of a rad for a while, schultz gun and an air line best, try to get into all the chassis first at all angles, then the out side,
give chassis a bloody good clean off first though,
ive got mine to do but gonna wait till it warms up
then it's going vertical with the help of a telehandler

cheers for the info mate much appreciated

JonnyP · Jan 20, 2013

This stuff.. Hammerite 5092953 Underbody Seal Tin 2.5Ltr: Amazon.co.uk: Car & Motorbike

Diablo user · Jan 20, 2013

I went a bit over the top with mine
After I replaced most of the sills, inner wings , boot floor ect I wire brushed the hole underneath then
seam sealed all the welds
6 litre s of shultz
5 litre s of chassis black
Then 5 litre of hamerite wax oil in black

I know it's goin ing over the top but hopfully I won't have to change any thing for a while I just plan to go over it every year with 5 litres of hamerite way oil

auf_wiedersehen_pet · Jan 20, 2013

When I do the inside of the chassis I use 50/50 used engine oil and hot waxoyl. Messy doing it but very satisfying.

undersealant

jabbae46

New Member

discodrivercumbria

Well-Known Member

jabbae46

New Member

JonnyP

Well-Known Member

Diablo user

New Member

auf_wiedersehen_pet

Well-Known Member

Similar threads