Does any one know the pinout for the back OEM head unit to be able to tell where to splice in the DSP adapter.
I have been able to get audio with wiring the OEM head unit into the CDC circuit and that way powering up the amp. But I can't see where i would be able to power up (remote signal) the DSP amplifier.
I have a range rover 2002 model, and I'm having some trouble installing an after-market unit I bought from Navall: Range Rover 2003-2004 Head Unit Satnav Bluetooth DVD GPS
With the HSE versions of the Range rover, it's simply a plug-and-play procedure, but since I have the Vogue type the amplifier is in the boot, which causes the installation to be a bit more complicated.
If anyone has been through similar difficulties, and perhaps has the instructions as to which actual pinout would work for this particular problem, your help would be greatly appreciated.
Thanks in advance.
I have been able to get audio with wiring the OEM head unit into the CDC circuit and that way powering up the amp. But I can't see where i would be able to power up (remote signal) the DSP amplifier.
I have a range rover 2002 model, and I'm having some trouble installing an after-market unit I bought from Navall: Range Rover 2003-2004 Head Unit Satnav Bluetooth DVD GPS
With the HSE versions of the Range rover, it's simply a plug-and-play procedure, but since I have the Vogue type the amplifier is in the boot, which causes the installation to be a bit more complicated.
If anyone has been through similar difficulties, and perhaps has the instructions as to which actual pinout would work for this particular problem, your help would be greatly appreciated.
Thanks in advance.
