treeslider drawing

Becks Bear · Nov 9, 2007

hello

i have just finished making a set of tree sliders for my 90

, now i have a problem can't figure out what type of brackets i need to weld onto the back of the tree sliders to allow me to bolt them to the landy

, has anybody got a drawing showing the measurements etc

many thanks

Griffdowg · Nov 9, 2007

the rear of the sliders is a tube which is a snug fit INTO the outrigger. measure it up and weld it in the right place.

did you get your animated things straight from landroveraddict?

G

Becks Bear · Nov 9, 2007

Griffdowg

thanks for the info, i made the tubes u talk about but was wondering did i weld then, or put a backing bolt on the whole thing and where it goes tight through the out rigger tighten it up onto the inner chassis

yes got the little buggers from the addict form

GRUNT · Nov 9, 2007

have word with Takefive he's got a drawing with measurements an everything on it for his rock sliders.

Griffdowg · Nov 9, 2007

mine just slotted straight in to the outrigger. they dont move around at all. no harm in having a bolt. but id leave it clear to use as a jacking point. sliders make great jacking points.

G

Griffdowg · Nov 9, 2007

like the new pic grunt

G

GRUNT · Nov 9, 2007

I caught it off Mondo he's brought it oop nooorth like the plague.

Griffdowg · Nov 9, 2007

duck n cover

treeslider drawing

Becks Bear

Active Member

Griffdowg

New Member

Becks Bear

Active Member

GRUNT

Well-Known Member

Griffdowg

New Member

Griffdowg

New Member

GRUNT

Well-Known Member

Griffdowg

New Member

Similar threads