tracking

shealyp38 · Feb 28, 2014

replaced the drag link arm and the steering arm and now need to get the tracking done
anywhere in birmingham that could do that for me

wammers · Feb 28, 2014

shealyp38 said:
replaced the drag link arm and the steering arm and now need to get the tracking done
anywhere in birmingham that could do that for me

Drag link has nothing to do with tracking. Why did you change steering arm?

shealyp38 · Feb 28, 2014

the big long bar behind the front axle with the track rod ends, not sure what its called

wammers · Feb 28, 2014

shealyp38 said:
the big long bar behind the front axle with the track rod ends, not sure what its called

One in front of axle is drag link. One behind it is track rod. Yes you will need tracking done and box centred.

TurnerDiagnostics · Mar 4, 2014

any tyre company can do the tracking, they just need advice as they often dont know how the system works.

In theory at least adjusting the tracking due to replacement track rod should not alter the centring position.

Get the tracking adjusted by altering the length of the track rod (the one behind the axle) and if the steering wheel position is not correct afterwards, then adjust the length of the drag link to correct it, the steering should not pull either way afterwards. Do NOT alter the steering wheel to correct the position or you will have to hold the steering towards one side when going straight ahead.

The drag link length should not need changing more than 1/2 a turn, normally much less, if it does the tracking was either out before or it has not been adjusted correctly.

If the car steers straight without any bias (pulling) on the steering wheel the steering is centred correctly

wil2813 · Mar 4, 2014

wammers · Mar 4, 2014

wil2813 said:
op2:

Why the popcorn? If the OP has only changed the track rod all it should need is tracking. If he has changed the track rod AND the drag link as it appeared from his first post it will need tracking and centralising. Unless he had managed to get the drag link exactly the same length as the old one, if he had he would be a very lucky lad.

wil2813 · Mar 4, 2014

wammers said:
Why the popcorn? If the OP has only changed the track rod all it should need is tracking. If he has changed the track rod AND the drag link as it appeared from his first post it will need tracking and centralising. Unless he had managed to get the drag link exactly the same length as the old one, if he had he would be a very lucky lad.

yes agreed & if you mess with track rods/drag link it will never ever be the exact same as before you can guess all you want all day,its simple take it to a locall tyre shop & get it checked they are more than 1 in every town in the country & most like me will do a free check

wammers · Mar 4, 2014

wil2813 said:
yes agreed & if you mess with track rods/drag link it will never ever be the exact same as before you can guess all you want all day,its simple take it to a locall tyre shop & get it checked they are more than 1 in every town in the country & most like me will do a free check

Or be like me and have your own tracking gauges.

tracking

shealyp38

New Member

wammers

No longer with us, RIP

shealyp38

New Member

wammers

No longer with us, RIP

TurnerDiagnostics

New Member

wil2813

Well-Known Member

wammers

No longer with us, RIP

wil2813

Well-Known Member

wammers

No longer with us, RIP

Similar threads