Thank you to all that helped advise I got clutch sorted ;-)

Hi all can I say thanks to all who commented about my last post about having no clutch feel I finally got some pressure in system and got it moving!!!! First time in 15 years it turned out to be the lenght of the bar in the master cylinder was not out far enough and not engaging so I am one happy bunny ! But I now have a new prob now when I try to start it it won't turn over at alli can hear the fuel pump whirring away and the lights don't fade when trying to turn it over but it only clicks once any idea ?? The only thing I have done is remove the middle seat to tap the brake cable back as it was sticking on . Surerly I can't have done anything wrong by doing that ........ Could I
Bh

Starter ? Battery fubar ? always go for the simple first .

Cheers I have took battery out to give it a full charge and clean the terminals ?!? What could I do with starter other clean connections and poss replace it ( which I could do without doing )
Bh

Which vehicle? which engine?

It's a 1984 2.25 petrol in a 110

Have had this problem on my TD5 and it is usually the solenoid. (Tap with a hammer usually sorts it out temporarily!) Don't have any experience re a 2.25 petrol engine. No doubt those with the knowledge will help you out further.