Other Suspension warning keeps activating.

....after new airbag and suspension arm fitted. Worked fine for a few weeks then I layed it up for 6 months. It now keeps on faulting. Any ideas?

Maybe a few clues would help
What car?
What warning message?
Is the battery fully charged and reading at least 12.6v?

Sounds like another job for one of these , lol

backinblack said:

Maybe a few clues would help
What car?
What warning message?
Is the battery fully charged and reading at least 12.6v?

Click to expand...

It's a Range Rover Vogue, Year 05. Stood over-night, Battery 12.8v and had been regularly charged whilst it had been stood for 6 months. Warning message says "HD inactive"

gstuart said:

Sounds like another job for one of these , lol
View attachment 289133

Click to expand...

Thanks for the sarcasm.........I'm new to Range Rovers and their electronics.

johnyg said:

Thanks for the sarcasm.........I'm new to Range Rovers and their electronics.

Click to expand...

And every right give back!!
Have you done the steering reset?
Engine started and steering fully left to fully right.

johnyg said:

It's a Range Rover Vogue, Year 05. Stood over-night, Battery 12.8v and had been regularly charged whilst it had been stood for 6 months. Warning message says "HD inactive"

Click to expand...

Do you mean HDC inactive?

johnyg said:

Thanks for the sarcasm.........I'm new to Range Rovers and their electronics.

Click to expand...

We do a good line in it here. When you drive a Range Rover no matter the trim level*, be it Vogue, or otherwise, you need a thi k skin, a good sense of humour , lots of sarcasm , and a second car

* sometimes it's handy to state which model you have, not the trim See. There's that sarcasm thing again.

Mark Piercy said:

And every right give back!!
Have you done the steering reset?
Engine started and steering fully left to fully right.

Click to expand...

He's a newbie... everyone knows that the first time you do the steering lock to lock it must be done with the engine OFF.

Hi all, yes I meant HDC inactive. I tried the lock to lock with engine off and the problem disappeared for quite some time (and mileage) but returned yesterday......it seems to perform this "trick" on one particular road (which is a bit bumpy).

johnyg said:

Hi all, yes I meant HDC inactive. I tried the lock to lock with engine off and the problem disappeared for quite some time (and mileage) but returned yesterday......it seems to perform this "trick" on one particular road (which is a bit bumpy).

Click to expand...

So could be a duff height sensor.

HDC is hill decent, have you had the codes read using LR specific diagnostics?

Looking at the RAVE manual HDC uses the ABS so maybe an ABS sensor issue.

Looks like a visit to the garage. Ta.

I believe the bmw inpa software that is about £70 for a cable and software will work on your year which will save you a lot of money in garage bills.