Suspension valve block overhaul kit.

J L Carr · Jun 8, 2014

Does any body know where you can get a suspension valve block overhaul kit from as I think I have a problem with 1 or 2, as they are making a clicking sound. The car is not going up to fast the compreser is working fine, so all it could be them they might need new rubber seals.

Datatek · Jun 8, 2014

They are supposed to click, the only reasons for a slow rise are a leak or a tired compressor. Lots of clicking would tend to confirm that the valves are operating to feed a leak.
For an overhaul kit I use symliseP38 spares on Ebay.

J L Carr · Jun 8, 2014

Then it would be better to get an overhaul kit for the compresor and try that first, as for a leak once the cars up it stays there.

wammers · Jun 8, 2014

J L Carr said:
Then it would be better to get an overhaul kit for the compresor and try that first, as for a leak once the cars up it stays there.

Read the "How to" section and learn how to check compressor output.

J L Carr · Jun 11, 2014

Ok Thanks for your help, here's another daft question where are the NRV's the only place I can think of is next to the compresor. The one's that's making the clicking sound.

wammers · Jun 11, 2014

J L Carr said:
Ok Thanks for your help, here's another daft question where are the NRV's the only place I can think of is next to the compresor. The one's that's making the clicking sound.

NRVs are inside valve block. Things that make the clicks are the solenoid valves. Look at the valve block refurb link in my "How to".

J L Carr · Jun 12, 2014

DOH !!!. Thanks.

Suspension valve block overhaul kit.

J L Carr

Active Member

Datatek

Well-Known Member

J L Carr

Active Member

wammers

No longer with us, RIP

J L Carr

Active Member

wammers

No longer with us, RIP

J L Carr

Active Member

Similar threads