Sorry EAS again

Baileyroverq · Jul 2, 2015

Hi
The EAS keeps going over height when stationary in traffic (soft fault) is there a way to check what is going on, i ave put the unlock programme on but it shows no faults as it keeps correcting itself any ideas please.

Datatek · Jul 2, 2015

Most likely cause is the driver pack, but worth looking at the height sensor in the read sensors tab to see if there is an odd reading. Try locking it at motorway height.

Grrrrrr · Jul 2, 2015

Might be worth checking the connector. I think it is behind the A pillar?

Datatek · Jul 2, 2015

Grrrrrr said:
Might be worth checking the connector. I think it is behind the A pillar?

Good call, passenger side footwell at the bottom of the A post, white connector, look for corrosion.

Baileyroverq · Jul 2, 2015

Thanks everybody for the responses will check it later and let you know

Rob Edge · Jul 2, 2015

I have had this fault with two separate vehicles. The first was the driver pack and on my latest one it was the osf height sensor misreading.

Sorry EAS again

Baileyroverq

Active Member

Datatek

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

Datatek

Well-Known Member

Baileyroverq

Active Member

Rob Edge

Repairer of scratches and scrapes.

Similar threads