Size of torx bolt in window mechanism?

G

Graham Carter

Guest

• Dec 18, 2005

• #1

Just tried to fit new window regulator in my Discovery. Got everything out
easily enough, and then found that the motor is fixed to the mechanism with
bloody Torx headed bolts. My largest Torx driver is too small at 25.
Anyone know the correct size, so I can get the right one?

I'd like to strangle the blocke who designed teh Torx head, plus any
designers who use them and engineers who torque them to riduculous levels.

Cheers!
Graham Carter

--
Carter Computer Services (Pvt) Ltd
P.O. Box A1619
Avondale
Harare
Zimbabwe
Tel: +263 4 300082
Cell: +263 91 329310
Fax: +263 918 329310
email:gcarter(at)mweb(dot)co(dot)zw

 

W

William Tasso

Guest

• Dec 18, 2005

• #2

Graham Carter <[email protected]> wrote:

> ...
> I'd like to strangle the blocke who designed teh Torx head, plus any
> designers who use them and engineers who torque them to riduculous
> levels.

For each and every invention there is an equal and opposite reason not to
employ them.

--
William Tasso

 

E

EMB

Guest

• Dec 18, 2005

• #3

Graham Carter wrote:

> I'd like to strangle the blocke who designed teh Torx head, plus any
> designers who use them and engineers who torque them to riduculous levels.

Why? It's almost impossible to strip the drive on one so they're a huge
improvement over philips, pozi and hex drive screws/bolts. A one-off
investment in a decent set of Torx drivers and they're no problem.


--
EMB

 

S

Steve

Guest

• Dec 18, 2005

• #4

EMB wrote:

> Why? It's almost impossible to strip the drive on one so they're a huge
> improvement over philips, pozi and hex drive screws/bolts. A one-off
> investment in a decent set of Torx drivers and they're no problem.
Not many folks know that Phillips screws were DESIGNED to strip, when
they reached the correct torque.

Steve

 

D

Dougal

Guest

• Dec 18, 2005

• #5

Graham Carter wrote:

> Just tried to fit new window regulator in my Discovery. Got everything out
> easily enough, and then found that the motor is fixed to the mechanism with
> bloody Torx headed bolts. My largest Torx driver is too small at 25.
> Anyone know the correct size, so I can get the right one?
>
> I'd like to strangle the blocke who designed teh Torx head, plus any
> designers who use them and engineers who torque them to riduculous levels.
>
> Cheers!
> Graham Carter

If you can measure the recess, conversion to Torx size here:
http://www.wihatools.com/torxspec.htm

 

A

Austin Shackles

Guest

• Dec 18, 2005

• #6

On or around Sun, 18 Dec 2005 17:25:30 +0200, "Graham Carter"
<[email protected]> enlightened us thusly:

>Just tried to fit new window regulator in my Discovery. Got everything out
>easily enough, and then found that the motor is fixed to the mechanism with
>bloody Torx headed bolts. My largest Torx driver is too small at 25.
>Anyone know the correct size, so I can get the right one?
>

probably 27 or 30. But it's worth having a complete set these days, they're
all over the place.
--
Austin Shackles. www.ddol-las.net my opinions are just that
"The great masses of the people ... will more easily fall victims to
a great lie than to a small one" Adolf Hitler (1889 - 1945)
from Mein Kampf, Ch 10