Series 3 clutch slave question

Doug · Jul 1, 2006

Replacing the clutch slave cylinder. Do I put grease in the area where the
shaft is? Or just fill the dust cover.

Thanks,
Doug

Alex · Jul 1, 2006

On Sat, 01 Jul 2006 20:32:47 GMT, "Doug" <[email protected]> wrote:

>Replacing the clutch slave cylinder. Do I put grease in the area where the
>shaft is? Or just fill the dust cover.
>

If you mean the rod which comes out of the cylinder to actuate the
fork, a small amount of rubber grease (the red stuff) smeared on the
rod will be sufficient.

Alex

Series 3 clutch slave question

Doug

Guest

Alex

Guest

Similar threads