Im still in the process of restoring/repairing my 110 - its an ex safari vehicle (I live in Kenya) so its needed a decent amount of work. But minus the wiring we are down to the cosmetics and fittings now.
I have some really big comfy seats that where used for client in the car, but I want to make a Second row Bench out of them, a bit of cutting and modding and I am sure I can get them to fit.
I was wondering if anyone had pointers. My plan is to use two full sized seats on either side while shaving down the padding on the inside shoulder of both then fix them to a frame and put the third seat in the middle with the 'shoulder' bits removed to fit. Im then going to get them recovered.
Any advice would be great - I'll let you know how the job goes
I have some really big comfy seats that where used for client in the car, but I want to make a Second row Bench out of them, a bit of cutting and modding and I am sure I can get them to fit.
I was wondering if anyone had pointers. My plan is to use two full sized seats on either side while shaving down the padding on the inside shoulder of both then fix them to a frame and put the third seat in the middle with the 'shoulder' bits removed to fit. Im then going to get them recovered.
Any advice would be great - I'll let you know how the job goes
