RR ignition

I am having ignition problems and it looks like a wiring problem ( as I have
replaced everything else !)
I have replace the disi wit one that has the amp on the side this has 2
connectors on it , anyone tell me were they should be connected to , I have
been told they both connect to the terminals on the coil (one each side ) ,
is this correct ?????,. also what wires should be connected to the coil ????
its an 3.5 efi 86 .

thanks Paul

On or around Mon, 28 Feb 2005 19:00:15 GMT, "paul-m" <[email protected]>
enlightened us thusly:

>I am having ignition problems and it looks like a wiring problem ( as I have
>replaced everything else !)
>I have replace the disi wit one that has the amp on the side this has 2
>connectors on it , anyone tell me were they should be connected to , I have
>been told they both connect to the terminals on the coil (one each side ) ,
>is this correct ?????,. also what wires should be connected to the coil ????
>its an 3.5 efi 86 .

the amp unit has a + and -, and yes, they connect to the coil. coil + from
the ignition switch, and on to the dizzy amp +. coil - to the dizzy amp -,
and make sure they're connected right way round. I fit was previously
electronic ignition, the coil should suit, but if it was points you need to
change the coil.


+ -
ign sw. ___________________||_____
| | | |
| coil| | |
| |__| |
| |
| _____________|
+| |-
|¯¯¯¯|
|amp |
|____|

You may have other wires on coil -, such as a fuel pump relay trigger.






--
Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
"The great masses of the people ... will more easily fall victims to
a great lie than to a small one" Adolf Hitler (1889 - 1945)
from Mein Kampf, Ch 10