Mr Rowland
New Member
- Posts
- 75
hi guys i have just ordered new air spring for rear of my p38 i have heard that you have to get all the air out of the springs, if so whats the best way any help would be grand 
replacing air spring
- Thread starter Mr Rowland
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 46,314
- Location
- Near Poitiers SW France
First off, they should always be fitted in pairs. PM me with an email address and I will send you guide to airbag replacment. It might be a good idea to have the EAS software and cable to hand in case of problems before you start.
TAKdriver
Active Member
- Posts
- 621
- Location
- Beside a field in Midlothian
hi guys i have just ordered new air spring for rear of my p38 i have heard that you have to get all the air out of the springs, if so whats the best way any help would be grand
I've been thinking about it for a while and will probably bedoing it within the next couple of months before I develop a hard problem.
Only advice I can give you is take Datateks advice : also get the software and cable from Data. He's been round the block on this one and is happy to help.
